Ball valves and fittings, Page 7
Product sorting
List of products
The RV600 check valves with G2" threaded connection ensure the flow of the medium in one direction. Pipe nominal bore DN50. Opening pressure at least 0.8 bar. Made of stainless...
QV hose valves with flanged connection with DN 100 nominal bore. Connection via flanges according to EN1092. Made of aluminium with NR cuff for temperatures up to +80°C.
Spout ball valves Ball valves with hose connection Control by lever in red in the range of 90° Body - threaded part and ball made of brass MS58, sealing ring - PTFE, o-ring -...
Shut-off valves GB200 with connection thread G1 1/4" with handwheel control. DN 32 nominal bore. Made of stainless steel 1.4408.
Shut-off valves GB200 with G1" connection thread with handwheel control. DN 25 nominal bore. Made of stainless steel 1.4408.
Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...
Stainless steel ball valve with 3/4" female threads in three-way design with "T" ball drilling and lever operation. Designed for aggressive media especially in the chemical and...
Ball valves for full flow water, lever operated up to 25 bar. Body in nickel-plated brass MS58, control lever in red. Sealing the shaft with a packing. Designed especially for...
Full flow ball valves, lever or wing handle operation. Body, threaded part and ball in MS58 brass, control lever in red. Sealing the shaft with a packing. Designed especially...
Ball valves for full flow water, lever operated up to 25 bar. Body in nickel-plated brass MS58, control lever in red. Sealing the shaft with a packing. Designed especially for...
Ball valves for full flow water, lever operated up to 25 bar. Nickel-plated brass MS58 body, control lever in red. Sealing the shaft with a packing. Designed especially for...
Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...
Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...
Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...
Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...
Shut-off valves GB200 with connection thread G1 1/2" with handwheel control. Nominal bore DN 40. Made of stainless steel 1.4408.
Shut-off valves GB200 with G2" connection thread with handwheel control. Nominal bore DN 50. Made of stainless steel 1.4408.
Shut-off valves for continuous pipe shut-off. Nominal bore DN 100, manual operation by handwheel. Made of cast iron GG25, graphite packing.
ball valve inside/outside thread 1/2" for compressed air up to 17 bar with full flow, operated by wing handle in blue. Body, threaded part and ball made of MS 58 brass, PTFE...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F03/05 flange with 11 mm square and 30 Nm torque. Material : anodized aluminium, NBR...
Three-way ball valves with L bore. Robust ball valves made of nickel-plated brass. Body - nickel-plated brass MS58, ball - chrome-plated brass, ball and stem seals - PTFE. For...
Ball valve VL851 DN65 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for contact...
Shut-off valves for continuous pipe shut-off. Nominal bore DN 65, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Shut-off valves for continuous pipe shut-off. Nominal bore DN 150, manual operation by handwheel. Made of cast iron GG25, graphite packing.
The VCQ110-230 electric actuator is used for closing industrial valves, particularly ball valves and butterfly valves. Electrical version 230 VAC. Torque 1,100 Nm with...
The VCQ110-400 electric actuator is used for closing industrial valves, particularly ball valves and butterfly valves. Electric version 400 VAC. Torque 1,100 Nm with connection...
06TTT flanged ball valves with DN100 nominal bore. Double-acting version with DA360 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...
The L20NEST3 foot gate valves with a nominal bore of DN200 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made...
Gate valves USL with flange DN 300 with infinitely variable handwheel control. Connection by flanges according to EN1092-1 type B. Made of GG25 cast iron.
VL851 flanged ball valves with DN100 nominal bore. Double-acting version with DA360 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...
Shut-off valves for continuous pipe shut-off. Nominal bore DN 125, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Shut-off valves for continuous pipe shut-off. Nominal bore DN 200, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Shut-off valves for continuous pipe shut-off. Nominal bore DN 50, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Stainless steel valve for industrial, food and chemical applications with internal threads G 1 1/4". It is a two-piece design of the valve with smaller dimensions than those...
Stainless steel tap for industrial, food and chemical applications with internal threads G 3/8". It is a two-piece design of the tap with smaller dimensions than those specified...
Shut-off valves for continuous pipe shut-off. Nominal bore DN 40, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Shut-off valves for continuous pipe shut-off. Nominal bore DN 80, manual operation by handwheel. Made of cast iron GG25, graphite packing.
Stainless steel tap for industrial, food and chemical applications with internal threads G 2 1/2". It is a two-piece design of the tap with smaller dimensions than those...
Full-flow ball valves with stopcock. The entire ballcock is degreased with no sign of silicone. For various industrial applications with requirements for degreasing, for example...
Stainless steel tap for industrial, food and chemical applications with internal threads G 1 1/2". It is a two-piece design of the tap with smaller dimensions than those...