Cyclone separator HFC-200 – G 3", 36,000 l/min liquid water separator · 50 bar
Code: HFC-200
Related products
Product detailed description
The HFC-200 cyclone separator removes liquid water, oil and coarse solid contaminants from compressed air. It separates them by centrifugal force, without a filter element. It has a G 3" thread, a flow of 36,000 l/min at 7 bar and a working pressure of up to 50 bar.
It belongs to the range of Omega Air HF filters up to 50 bar: the housing is the same as on these filters, but instead of a filter element it contains a cyclone element.
Specifications
| Parameter | Value |
|---|---|
| Connection | G 3" (female pipe thread) |
| Flow at 7 bar | 36,000 l/min (2,160 Nm³/h) |
| Working pressure | 50 bar |
| Working temperature | +1.5 to +65 °C |
| Principle | centrifugal separation of liquid water and oil, without a filter element |
| Spare cyclone element | HFC-200V |
| Housing | cast aluminium with powder coating |
| Dimensions A × B × C × D | 772 × 198 × 70 × 620 mm |
| Weight | 30.4 kg |
| Condensate drain | ordered separately |
| Condensate outlet | G 1/2" opening at the bottom |
Housing and dimensions
Housing: cast aluminium with powder coating. The air is connected through female pipe threads in the head; the condensate leaves through a G 1/2" opening at the bottom. Dimensions according to the manufacturer: 772 × 198 × 70 × 620 mm, weight 30.4 kg.
Flow by pressure
The flow applies to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, it is multiplied by the manufacturer’s correction factor:
| Pressure (bar) | 3 | 5 | 7 | 10 | 13 | 16 | 20 | 30 | 40 | 50 |
|---|---|---|---|---|---|---|---|---|---|---|
| Flow (l/min) | 18,000 | 27,000 | 36,000 | 49,680 | 63,000 | 76,680 | 94,680 | 139,680 | 184,680 | 229,680 |
Cyclone element and accessories
The separator collects a lot of water, so it needs a condensate drain, which is ordered separately. Suitable drains: AOK50B and AOK50SS. The spare cyclone element is listed in the specifications table.
Where to place it
It goes after the compressor or aftercooler, before the HF filters. It traps liquid water and oil before they reach the filters, so the filter elements clog less.
You will find all sizes and pressures among the HFC cyclone separators.
Additional parameters
| Category: | Cyclone water separators for compressed air |
|---|---|
| Pressure: | 50 bar |
| Connecting: | 3" |
| Dimensions: | 772 × 198 × 70 × 620 mm |
| Filter insert: | HFC-200V |
| Material: | Aluminium |
| Working temperature: | +1.5 / +65°C |
| Flow: | 36,000 l/min |
| Product type: | Cyclone separator |
| Filtration stage: | Cyclone separator |
| Connection type: | Female thread |
Product rating
Be the first who will post an article to this item!
Alfa and Omega from SloveniaIn the Slovenian capital, Ljubljana, there is a company specialized in compressed air treatment, production of industrial filters and filter inserts, separators or special membrane dryers and other products. Omega Air was founded in 1988 as a family business and soon secured a place in the industry. Over the years, Omega Air's workforce has also grown with increasing production and today the company employs more than 250 people. |
 |
 |
Omega products are used everywhereA wide range of applications is typical for Omega Air products. Its products are used in heavy industry as well as by private entities. Slovenia's footprint is thus noticeable in industrial sectors such as electrical, gastronomy, pharmaceuticals, moto and also in the chemical-industrial sector. However, the company's main product is special filters, which are exported all over the world. |
No greenhorn in the industryOmega Air also boasts several proprietary innovations and patents that originate in the development department. The company has also been awarded several times for its innovative solutions at the International Engineering Fair itself, which is traditionally held in Hannover, Germany. The Omega Air product range is brought to you by our air compressors company below. |
What Omega Air produces:
|