Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    EUR
    Language
    English
    Home / Hoses

    Compressed air hose, Page 23

    Bestsellers

    Polyurethane tube blue 6/4 mm
    Stock (290 m)
    Code: PUJ64B
    Was: €1,08  (–10 %)
    €0,97
    (€0,80 excl. VAT)
    Polyurethane tube blue 8/5.5 mm
    Stock (>1000 m)
    Code: PUJ855B
    Was: €1,65  (–9 %)
    €1,49
    (€1,23 excl. VAT)
    Teflon hose TEF clear 4/2.5 mm
    Stock (180 m)
    Code: TEF425N
    Was: €2,52  (–4 %)
    €2,40
    (€1,98 excl. VAT)

    Product sorting

    3673 items total

    List of products

    Hose clamp PW4 - 51 mm
    Tip
    €6,27 –4 %
    Hose clamp PW4 - 51 mm
    Stock (67 pcs)
    €4,93 excl. VAT
    €5,96 / pcs

    PW4 51mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

    Code: PW4-051
    FoxiVulca Sil2 suction hose 55 mm
    FoxiVulca Sil2 suction hose 55 mm
    Stock (3 m)
    €40,90 excl. VAT
    €49,49 / m

    FoxiVulca Sil1 55 mm diameter suction hose made of fibreglass-coated silicone with steel wire spiral. Two-layer design. Designed for the transport of high temperature gases, for...

    Code: FVSI2-055
    254298 1 otocne sroubeni s vnejsim zavitem 3 8 hadice 8 x 12 mm
    Tip
    €24,29 –4 %
    Swivel fitting with external thread 3/8" - hose 8 x 12 mm
    Stock (6 pcs)
    €19,07 excl. VAT
    €23,08 / pcs

    Swivel fitting with male tapered thread R3/8" for 8 x 12 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

    Code: DVK81238
    FoxiSpecial Car-Memory suction hose 80 mm
    FoxiSpecial Car-Memory suction hose 80 mm
    up to 20 days (2 m)
    €63,05 excl. VAT
    €76,29 / m

    FoxiSpecial Car-Memory 80 mm diameter exhaust hose made of temperature-resistant plastic with plastic profile spiral. Smooth inside for exceptional abrasion resistance and to...

    Code: FSCM-080
    puw4 spona hadicova odsavaci
    New
    Hose clip PUW4-160
    Stock (14 pcs)
    €12,23 excl. VAT
    €14,80 / pcs

    Hose clamp for attaching right-hand spiral suction hoses in the range 152-172 mm with 12 mm tape width. Easy assembly and perfect sealing thanks to the bridging element over the...

    Code: PUW4-12-160
    Hose clamp SW4 - 55 mm
    €7,28 –5 %
    Hose clamp SW4 - 55 mm
    Stock (10 pcs)
    €5,71 excl. VAT
    €6,91 / pcs

    SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

    Code: SW4-055
    Hose clamp SW4 - 115 mm
    €14,33 –5 %
    Hose clamp SW4 - 115 mm
    Stock (5 pcs)
    €11,25 excl. VAT
    €13,61 / pcs

    SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

    Code: SW4-115
    Hose clamp PW4 - 73 mm
    Tip
    €8,87 –5 %
    Hose clamp PW4 - 73 mm
    Stock (129 pcs)
    €6,96 excl. VAT
    €8,42 / pcs

    PW4 73mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

    Code: PW4-073
    Worm hose clamp W4 - 9/150 mm
    Tip
    €1,38 –5 %
    Worm hose clamp W4 - 9/150 mm
    Stock (794 pcs)
    €1,08 excl. VAT
    €1,31 / pcs

    Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

    Code: W4-150
    Worm hose clamp W4 - 9/160 mm
    Tip
    €1,46 –5 %
    Worm hose clamp W4 - 9/160 mm
    Stock (170 pcs)
    €1,14 excl. VAT
    €1,38 / pcs

    Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and...

    Code: W4-160
    LPH pressing ring - 22 mm
    Tip
    €1,68 –4 %
    LPH pressing ring - 22 mm
    Stock (110 pcs)
    €1,32 excl. VAT
    €1,60 / pcs

    LPH press ring with a diameter of 22 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

    Code: LPH-22
    Mounting bracket KW1-25 - 45 mm
    €18,83 –4 %
    Mounting bracket KW1-25 - 45 mm
    Stock (25 pcs)
    €14,79 excl. VAT
    €17,89 / pcs

    KW mounting bracket with a diameter of 45 mm and a tape width of 25 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

    Code: KW1-25-045
    puw4 spona hadicova odsavaci
    New
    Hose clip PUW4-127
    Stock (11 pcs)
    €11,81 excl. VAT
    €14,29 / pcs

    Hose clamp for attaching right-hand spiral suction hose in the range 122-142 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...

    Code: PUW4-12-127
    Pliers for deformation buckles
    Original parts
    €69,57 –5 %
    Pliers for deformation buckles
    Stock (2 pcs)
    €54,62 excl. VAT
    €66,09 / pcs

    Pliers for mounting EW deformation clamps.

    Code: ZOSZ
    MGP rucni navijeci bubny hadice
    New
    €425,45 –5 %
    Winding drum MGP20-815
    Stock (1 pcs)
    €334,02 excl. VAT
    €404,17 / pcs

    Designed for TPU 8 × 12 hose type with a length of 15 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...

    Code: MGP20-815
    Fire hose EL1-C52-20M
    Fire hose EL1-C52-20M
    Stock (2 pcs)
    €102,50 excl. VAT
    €124,02 / pcs

    Standard fire hose in white, certified according to DIN 14811 class 1. Supplied in performance class L1. Made of 100% synthetic polyester yarn with a black EPDM inner liner in a...

    Code: EL1-C52-20M
    Fixed teat with protective spring 5 x 8 mm
    Tip
    €19,29 –5 %
    Fixed teat with protective spring 5 x 8 mm
    Stock (10 pcs)
    €15,14 excl. VAT
    €18,32 / pcs

    Fixed quick coupling nipple with protective spring for 5 x 8 mm hose in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized...

    Code: ES5SSVK
    LPH pressing ring - 25 mm
    Tip
    €1,78 –5 %
    LPH pressing ring - 25 mm
    Stock (95 pcs)
    €1,40 excl. VAT
    €1,69 / pcs

    LPH press ring with a diameter of 25 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

    Code: LPH-25
    puw4 spona hadicova odsavaci
    New
    Hose clip PUW4-060
    Stock (5 pcs)
    €7,50 excl. VAT
    €9,08 / pcs

    Hose clamp for attaching right-hand spiral suction hose in the range 52-72 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...

    Code: PUW4-9-060
    Hose clamp SW4 - 110 mm
    €11,82 –4 %
    Hose clamp SW4 - 110 mm
    Stock (10 pcs)
    €9,28 excl. VAT
    €11,23 / pcs

    Hose clamp SW4 110mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

    Code: SW4-110
    Extraction hose FoxiBase PUR SL-SE 160 mm
    Extraction hose FoxiBase PUR SL-SE 160 mm
    Stock (15 m)
    €27,98 excl. VAT
    €33,85 / m

    FoxiBase PUR SL-SE suction hose with a diameter of 160 mm made of 0.55 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

    Code: FBSL-160
    Plug-in hose LOPC - 23/16 mm
    Plug-in hose LOPC - 23/16 mm
    Stock (74 m)
    €14,47 excl. VAT
    €17,51 / m

    The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 23/16 mm grey. Special pressure hoses for easy assembly without the need for hose...

    Code: LOPC-16
    Plug-in hose LOPG - 23/16 mm
    Plug-in hose LOPG - 23/16 mm
    Stock (78 m)
    €14,47 excl. VAT
    €17,51 / m

    The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 23/16 mm green. Special pressure hoses for easy assembly without the need for hose...

    Code: LOPG-16
    Hose clamp PW4 - 130 mm
    Tip
    €10,65 –4 %
    Hose clamp PW4 - 130 mm
    Stock (58 pcs)
    €8,36 excl. VAT
    €10,12 / pcs

    PW4 130mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

    Code: PW4-130
    Hose clamp SW4 - 195 mm
    €18,83 –4 %
    Hose clamp SW4 - 195 mm
    Stock (9 pcs)
    €14,79 excl. VAT
    €17,89 / pcs

    Hose clamp SW4 195mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

    Code: SW4-195
    FoxiBase Santoprene SL 80 mm suction hose
    FoxiBase Santoprene SL 80 mm suction hose
    up to 20 days (8 m)
    €32,16 excl. VAT
    €38,91 / m

    FoxiBase Santoprene SL 80 mm diameter suction hose made of 0.55 mm thick santoprene TPV with steel wire spiral. Smooth inside for exceptional abrasion resistance and to ensure...

    Code: FBSNS-080
    Hose clamp SW4 - 100 mm
    €10,47 –4 %
    Hose clamp SW4 - 100 mm
    Stock (1 pcs)
    €8,22 excl. VAT
    €9,95 / pcs

    SW4 100mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

    Code: SW4-100
    Extraction hose FoxiBase PUR SL-SE0.4 300 mm
    Tip
    Extraction hose FoxiBase PUR SL-SE0.4 300 mm
    up to 20 days (3 m)
    €57,92 excl. VAT
    €70,08 / m

    FoxiBase PUR SL-SE0.4 suction hose with a diameter of 300 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

    Code: FBSE-300
    Extraction hose FoxiBase PUR SL-SE 40 mm
    Extraction hose FoxiBase PUR SL-SE 40 mm
    Stock (29 m)
    €11,66 excl. VAT
    €14,11 / m

    FoxiBase PUR SL-SE 40 mm diameter suction hose made of 0.55 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with non-flammable...

    Code: FBSL-040
    HTW spona hadicova 12mm
    Hose clamp screw HTW1 - 58/75 mm
    Stock (18 pcs)
    €2,58 excl. VAT
    €3,12 / pcs

    Worm hose clamps with a band width of 12 mm and a range of 58-75 mm in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce...

    Code: HTW1-12-075
    Smooth V-belt DCA-1480
    Tip
    €25,87 –10 %
    Smooth V-belt DCA-1480
    Stock (4 pcs)
    €19,24 excl. VAT
    €23,28 / pcs

    The inner length is 1 450 mm and the calculated length is 1 480 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

    Code: DCA-1480
    Fire Hose ESL2-C42-20M
    Fire Hose ESL2-C42-20M
    Stock (2 pcs)
    €132,10 excl. VAT
    €159,84 / pcs

    Fire hoses with reflective yellow colour visible in darkness and smoke, certified according to DIN 14811 in performance class L2. Made of 100% synthetic polyester yarn with...

    Code: ESL2-C42-20M
    FoxiPro PUR suction hose H 80 mm
    Tip
    FoxiPro PUR suction hose H 80 mm
    Stock (5 m)
    €30,72 excl. VAT
    €37,17 / m

    FoxiPro PUR L suction hose with a diameter of 80 mm, made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...

    Code: FPH-080
    Mounting bracket KW1-25 - 48 mm
    €19,22 –5 %
    Mounting bracket KW1-25 - 48 mm
    Stock (18 pcs)
    €15,08 excl. VAT
    €18,25 / pcs

    Mounting bracket KW with a diameter of 48 mm and a tape width of 25 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

    Code: KW1-25-048
    Smooth V-belt DCA-1610
    Tip
    €26,19 –10 %
    Smooth V-belt DCA-1610
    Stock (2 pcs)
    €19,48 excl. VAT
    €23,57 / pcs

    The inner length is 1 580 mm and the calculated length is 1 610 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

    Code: DCA-1610
    FoxiSpecial Car-Memory suction hose 76 mm
    FoxiSpecial Car-Memory suction hose 76 mm
    Stock (14 m)
    €60,59 excl. VAT
    €73,31 / m

    FoxiSpecial Car-Memory exhaust hose with a diameter of 76 mm made of temperature-resistant plastic with plastic profile spiral. Smooth inside for exceptional abrasion resistance...

    Code: FSCM-076
    LPH pressing ring - 21 mm
    Tip
    €1,68 –4 %
    LPH pressing ring - 21 mm
    Stock (347 pcs)
    €1,32 excl. VAT
    €1,60 / pcs

    LPH press ring with a diameter of 21 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

    Code: LPH-21
    Press ring LPH - 13.5 mm
    Tip
    €0,58 –5 %
    Press ring LPH - 13.5 mm
    Stock (13 pcs)
    €0,45 excl. VAT
    €0,55 / pcs

    LPH press ring with diameter 13,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

    Code: LPH-13-5
    254292 1 otocne sroubeni s vnejsim zavitem 1 4 hadice 6 5 x 10 mm
    Tip
    €22,97 –5 %
    Swivel fitting with external thread 1/4" - hose 6.5 x 10 mm
    Stock (46 pcs)
    €18,03 excl. VAT
    €21,82 / pcs

    Swivel fitting with male tapered thread R1/4" for hose size 6.5 x 10 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure...

    Code: DVK651014
    Smooth V-belt DCA-1330
    Tip
    €23,87 –10 %
    Smooth V-belt DCA-1330
    Stock (2 pcs)
    €17,75 excl. VAT
    €21,48 / pcs

    The inner length is 1 300 mm and the calculated length is 1 330 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

    Code: DCA-1330

    Listing controls

    3673 items total
    Top