Aluminum profiles and accessories, Page 15
Product sorting
List of products
Connecting plate for perpendicular connection of profiles with an edge width of 45 or 90 mm.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Flange for attaching bases and castors to AC 30-6 and IM 30-6 series profiles with a 30x60 section, equipped with an M12 thread.
Flange for round profiles AC 30-6 with a 30x60 cut for mounting bases using an M8 thread.
Chain for counterweights with a width of 6 mm.
Round cover cap for corner connector 084.310.022 made of black polyamide.
Round cover for corner connector 084.310.022 made of grey polyamide.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Aluminium profile with a modular section dimension of 90x90 in a corner design with AC 45-8 shaped grooves.
Counterbalance kit for sliding doors designed for installation in AC 45-8 series profile with a 45x90 section.
Set of 2 end parts for counterweight (right + left) for mounting on profile AC 45-8 with a 45x90 cut.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.
Slot connector for connecting BH 20-6 series profiles at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.
Groove connector for joining BH 20-6 series profiles at a 60° angle.
Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Plastic end cap for 40x120 profiles in grey
Rectangular nut M8 for AC 40-8, AC 45-8 slots, with guide, 20 mm length
Angle bracket for joining profiles of the AC 45-8 series with a 45x45 cut at a 45° angle.
Angle bracket for groove for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Square cover for corner connector 084.310.013 made of black polyamide.
Aluminium profile with a modular cross-section dimension of 18.5x32 and a groove shape of AC 45-8. Lightweight version with a weight of 0.72 kg/m.
Aluminium profile with a modular section dimension of 30x30 with a special groove for installing panels or wire mesh.
Mounting bracket for gas spring to aluminium profile.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Cover strip for closing channel profile 80x80, IM 40-8.
24V DC voltage source for powering HT LED lighting with a power consumption of up to 20 W.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Square base for mounting on profiles with a 45x45 section.
Groove connector for joining BH 20-6 series profiles at a 30° angle.
Flange for attaching bases and castors to BH 30-8 series profiles with a 30x60 section, equipped with an M12 thread.
Flange for attaching bases and castors to 45x90 profiles with M10 thread.
Profile for AC 45-8 groove for mounting a panel with a thickness of 9.5 mm.
Long T-slot nut with ball IM 40-8 with 2 M8 threads, made of galvanised steel.