AC 45-8, Page 7
Product sorting
List of products
Plastic cap for 45x45 profile for panel installation, in black
Plastic cap for 45x45 profile for panel installation, in grey
Aluminium hanger with dimensions 76x62, for profiles 32/45.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Semi-circular aluminium profile for creating hinged doors from plastic panels up to 15 mm thick.
Screw for AC 40-8 and AC 45-8 grooves, size M8x25, made of galvanised steel
Aluminium profile with modular cross-section dimensions of 45x45 and 2 adjacent AC 45-8 shaped grooves. Lightweight version with a weight of 1.36 kg/m.
Aluminium bracket with dimensions 100.5x80, for 45/45 profiles.
Square base for mounting on profiles with a 45x45 section.
Aluminium hanger with dimensions 100.5x62, for profiles 32/45.
Two-part base for mounting on profiles with sections 90x90 and 90x180.
Door stop with dimensions 56x30 equipped with a magnet.
Aluminium profile with a modular cross-section dimension of 45x45 and with 4 grooves in the shape of AC 45-8. Lightweight version with a weight of 1.53 kg/m.
Round base with a diameter of 120 mm for mounting on 32x45 section profiles.
Plastic end cap for 60x90 profiles in black
Aluminium hanger with dimensions 50x50, for profiles 30/30, 32/32.
Groove connector for direct connection of AC 40-8 and AC 45-8 series profiles.
Aluminium profile with a modular cross-section dimension of 45x45 and with 1 groove in the shape of AC 45-8.
Connecting plate for creating a perpendicular connection of 2 AC 45-8 profiles with a 18.5x45 cut to an AC 45-8 45x45 profile with a closed side without a groove.
Counterbalance kit for sliding doors designed for installation in AC 45-8 series profile with a 45x90 section.
Set of 2 end parts for counterweight (right + left) for mounting on profile AC 45-8 with cross-section dimensions of 45x90.
Flange for connecting a 45x90 profile to a compressed air source, with a 1/2" thread.
Connector for creating perpendicular joints of round profiles of the AC 45-8 series with a 45x45 cross-section in 3 axes with the possibility of axial deviation of 45°.
Connector for creating perpendicular joints of round profiles of the AC 45-8 series with a 45x45 cross-section in 2 axes with the possibility of axial deviation of 45°.
Square base for mounting on profiles with a 90x90 section.
Connecting latch for profiles of the AC 40-8 and AC 45-8 series, with M8x40 screw.
Sliding profile for guiding doors made of AC 45-8 profiles with a cross-section edge of 18.5 mm.
LED light for AC 40-8 and AC 45-8 profile grooves with green colour and 250 mm length.
LED light for grooves of AC 40-8 and AC 45-8 profiles with red colour and a length of 250 mm.
LED light for AC 40-8 and AC 45-8 profile grooves with white colour 4000 K and length of 250 mm.
Universal angle bracket with a 90° angle and dimensions of 25x40 for connecting profiles from the outside using M8x20 screws.
Connecting latch for direct connection of AC 40-8 and AC 45-8 series profiles.
Chain for counterweights with a width of 6 mm.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Counterbalance weight with a mass of 1kg for mounting into AC 45-8 series profiles with a 45x90 section.
Corner support for creating partitions with a width of 20 mm between the corners of structures made of AC 45-8 series profiles.
Flange for round profiles AC 45-8 with 45x90 cross-section for mounting bases using M16 thread.
Screw for AC 40-8 and AC 45-8 grooves, size M8x20, made of galvanised steel
Aluminium profile with modular cross-section dimensions of 30x30 with a special groove for installing panels or wire mesh.
Aluminium profile with a modular cross-section dimension of 45x45, with rounded corners and 2 adjacent grooves in the shape of AC 45-8.