BH 30-8, Page 3
Product sorting
List of products
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Cover strip for closing the 60x60 channel profile.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Door stop 30x14 with hole for magnet D=18 mm, made of grey polyamide.
Clip for securing cables to aluminium profiles.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Square cap for corner coupling 084.310.022 made of grey polyamide.
Square cover cap for corner coupling 084.310.022 made of black polyamide.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Door stop for removable door installation, made of brass.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Aluminium end cap for 60x60 channel profile.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Adjustable foot 40x100 mm with M8 thread
The 60x60 aluminium profile allows for the creation of channels with cables.
Plastic end cap for 30x60 profiles in grey
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Mounting bracket for gas spring to aluminium profile.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Aluminium hinge with dimensions 65x42, profile 30/panel.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 300 N force.
Gas spring with 110 mm stroke and 50 N force.
Aluminium hanger with dimensions 55x42, for profile 30/panel.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Short nut M6 for BH 30-8 slot, made of stainless steel.