BH 40-10, Page 5
Product sorting
List of products
Angle bracket for joining profiles with grooves series BH 40-10, BH 45-10 and at an angle of 45° with the possibility of any adjustment.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x20 made of stainless steel
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Gas spring with a stroke of 200 mm and a force of 250 N.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Gas spring with a stroke of 200 mm and a force of 350 N.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Square base for mounting on 80x80 section profiles.
Aluminium profile with a modular cross-section dimension of 80x80 with 8 BH 40-10 shaped grooves. Standard version with a weight of 4.20 kg/m.
Rubber base pad insert with a diameter of 100 mm.
Plastic cap for angle bracket 38.5x76 in black.
Step drill with diameters D=9 mm and D=13.5 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
A device for precise drilling of holes into aluminium profiles with BH 40-10 and BH 50-10 grooves.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Square base for mounting on profiles with a 40x40 section.
Door stop with dimensions 56x30 equipped with a magnet.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
A set of parts for the quick and secure fixing of panels for fencing made from grooved profiles of the BH 40-10, BH 45-10 and BH 50-10 series.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Aluminium profile with a modular cross-sectional dimension of 40x40 and 4 grooves of BH 40-10 shape. Standard version with a weight of 1.49 kg/m.
Universal angle bracket with a 90° angle and dimensions of 38x36 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Blanking plug for 13 mm hole, made of grey polyamide.
A sliding latch with a spring for closing doors, made of polyamide.
Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Panel fixing block for thicknesses of 1 to 8 mm.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Mounting bracket for gas spring to aluminium profile.
Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Blanking plug for 7.5 mm hole, made of black polyamide.