Plastic manometers MS100

Materials used: plastic body, copper alloy measuring element and pointer, acrylic windscreen
Basic design of pressure gauges with bottom and rear connection, designed for pressure measurement of non-aggressive media with lower demands on the durability of the instrument
Manometers in 100 mm diameter in plastic with 1/2" thread

Standard pressure gauge MS - diameter 100 mm and bottom thread 1/2"
	Ordering number	Diameter pointers mm	Pressure range bar	Connection	Thread "	Class accuracy %	Operational temperature °C
	MS06-01	100	-1 to 0	lower	1/2"	1,6%	-40/+60
	MS06-02	100	-1 to 0.6	lower	1/2"	1,6%	-40/+60
	MS06-03	100	-1 to 1.5	lower	1/2"	1,6%	-40/+60
	MS06-04	100	-1 to 3	lower	1/2"	1,6%	-40/+60
	MS06-05	100	-1 to 5	lower	1/2"	1,6%	-40/+60
	MS06-06	100	-1 to 9	lower	1/2"	1,6%	-40/+60
	MS06-07	100	-1 to 15	lower	1/2"	1,6%	-40/+60
	MS06-09	100	0 to 1	lower	1/2"	1,6%	-40/+60
	MS06-10	100	0 to 1.6	lower	1/2"	1,6%	-40/+60
	MS06-11	100	0 to 2.5	lower	1/2"	1,6%	-40/+60
	MS06-12	100	0 to 4	lower	1/2"	1,6%	-40/+60
	MS06-13	100	0 to 6	lower	1/2"	1,6%	-40/+60
	MS06-14	100	0 to 10	lower	1/2"	1,6%	-40/+60
	MS06-15	100	0 to 16	lower	1/2"	1,6%	-40/+60
	MS06-16	100	0 to 25	lower	1/2"	1,6%	-40/+60
	MS06-17	100	0 to 40	lower	1/2"	1,6%	-40/+60
	MS06-18	100	0 to 60	lower	1/2"	1,6%	-40/+60
	MS06-19	100	0 to 100	lower	1/2"	1,6%	-40/+60
	MS06-20	100	0 to 160	lower	1/2"	1,6%	-40/+60
	MS06-21	100	0 to 250	lower	1/2"	1,6%	-40/+60
	MS06-22	100	0 to 400	lower	1/2"	1,6%	-40/+60