Plastic manometers MS100M

Materials used: plastic body, copper alloy measuring element and pointer, acrylic windscreen
Basic design of manometers with bottom and rear connection, designed for pressure measurement of non-aggressive media with lower requirements for mechanical resistance of the instrument
Manometers with diameter 100 mm in plastic with metric thread M20 x 1,5

Standard manometers MS - diameter 100 mm and side thread M20*1,5
Ordering number	Diameter pointers mm	Pressure range bar	Connection	Thread metric	Class accuracy %	Operational temperature °C
MS07-01	100	-1 to 0	lower	M20*1.5	1,6%	-40/+60
MS07-02	100	-1 to 0.6	lower	M20*1.5	1,6%	-40/+60
MS07-03	100	-1 to 1.5	lower	M20*1.5	1,6%	-40/+60
MS07-04	100	-1 to 3	lower	M20*1.5	1,6%	-40/+60
MS07-05	100	-1 to 5	lower	M20*1.5	1,6%	-40/+60
MS07-06	100	-1 to 9	lower	M20*1.5	1,6%	-40/+60
MS07-07	100	-1 to 15	lower	M20*1.5	1,6%	-40/+60
MS07-09	100	0 to 1	lower	M20*1.5	1,6%	-40/+60
MS07-10	100	0 to 1.6	lower	M20*1.5	1,6%	-40/+60
MS07-11	100	0 to 2.5	lower	M20*1.5	1,6%	-40/+60
MS07-12	100	0 to 4	lower	M20*1.5	1,6%	-40/+60
MS07-13	100	0 to 6	lower	M20*1.5	1,6%	-40/+60
MS07-14	100	0 to 10	lower	M20*1.5	1,6%	-40/+60
MS07-15	100	0 to 16	lower	M20*1.5	1,6%	-40/+60
MS07-16	100	0 to 25	lower	M20*1.5	1,6%	-40/+60
MS07-17	100	0 to 40	lower	M20*1.5	1,6%	-40/+60
MS07-18	100	0 to 60	lower	M20*1.5	1,6%	-40/+60
MS07-19	100	0 to 100	lower	M20*1.5	1,6%	-40/+60
MS07-20	100	0 to 160	lower	M20*1.5	1,6%	-40/+60
MS07-21	100	0 to 250	lower	M20*1.5	1,6%	-40/+60
MS07-22	100	0 to 400	lower	M20*1.5	1,6%	-40/+60