Measurement of pressure and temperature of the medium, Page 2
-
Manometers; for measuring the pressure of a medium
-
Thermometers; for temperature measurement
-
Pressure sensors; pressure transducers and switches
Bestsellers
The reducer is equipped with an internal thread M12 × 1.5 and an external thread M20 × 1.5.
The connection is equipped with two internal threads M20 × 1.5 and M20 × 1.5 left-hand.
The diameter of the cover is 63 mm. It is suitable for applications with higher demands on instrument life.
Manometer for low pressures in millibars with a range of 0 to 600 mbar. Indicator version 63 mm with 1/4" threaded rear connection. Designed for measuring low pressures of gases...
The reducer is equipped with internal thread G 1/2" and external thread M20 × 1.5.
The reducer is equipped with G 1/4" female thread and M20 × 1.5 male thread.
The reducer is equipped with an internal thread M12 × 1.5 and an external thread G 1/4".
The reducer is equipped with an internal thread M20 × 1.5 and an external thread G 1/2".
Stainless steel glycerine manometer with 100 mm indicator and pressure measurement range 0/10 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
The WIKA DMUB pressure transducers with a range of 0 to 16 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
Pressure switch with expansion function for pressure range -10 to 70 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range -10 to -70 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range -100 to -350 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range -50 to -200 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range 0.3 to 2 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range -1 to -10 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
Pressure switch with switching function for pressure range -50 to -200 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
The working pressure is 25 bar. Connection is M20 × 1.5. The body of the tap is made of brass.
TWALL aluminium thermometer with 100 mm diameter pointer and temperature range from 0 to 120°C. Rear version of the thermometer with 40 mm long thermowell and 1/2" threaded...
The WIKA copper thermometer sump serves as a stem protector with a length of 100 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
The WIKA copper thermometer sump serves as a stem protector with a length of 63 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is stainless steel 1.4571.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is made of steel.
TWALL aluminium thermometer with 100 mm diameter pointer and temperature range from 0 to 120°C. Rear version of the thermometer with 60 mm long thermowell and 1/2" threaded...
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The WIKA copper thermometer sump serves as a stem protector with a length of 160 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
TWALL aluminium thermometer with 100 mm pointer diameter and temperature range from 0 to 200°C. Rear version of the thermometer with 200 mm long sump and 1/2" threaded...
TWALL aluminium thermometer with 100 mm pointer diameter and temperature range from -30 to 50°C. Rear version of the thermometer with 40 mm long thermowell and 1/2" threaded...
TWALL aluminium thermometer with 100 mm pointer diameter and temperature range from -30 to 50°C. Rear version of the thermometer with 60 mm long thermowell and 1/2" threaded...
TWALL aluminium thermometer with 100 mm diameter pointer and temperature range from 0 to 120°C. Rear version of the thermometer with a 100 mm long sump and 1/2" threaded...
TWALL aluminium thermometer with 100 mm pointer diameter and temperature range from 0 to 60°C. Rear version of the thermometer with 40 mm long thermowell and 1/2" threaded...
The WIKA copper thermometer sump serves as a stem protector with a length of 200 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
TWALL aluminium thermometer with 100 mm pointer diameter and temperature range from 0 to 160°C. Rear version of the thermometer with 60 mm long thermowell and 1/2" threaded...
Precision manometer with 160 mm pointer and pressure measurement range 0/1000 bar with a minimum deviation of 0.6%. Side connection 1/2". Suitable for demanding for accurate...
Precision manometer with 160 mm pointer and pressure measurement range 0/2.5 bar with a minimum deviation of 0.6%. Side connection 1/2". Suitable for demanding for accurate...