Measurement of pressure and temperature of the medium, Page 22
Product sorting
List of products
WIKA DMU pressure transmitters with a range of 0 to 6 bar are designed to convert pressure to a continuous electrical value. Protection IP65, input voltage 10-30 VDC, connectors...
WIKA DMU pressure transmitters with a range of 0 to 60 bar are designed to convert pressure to a continuous electrical value. Protection IP65, input voltage 10-30 VDC,...
WIKA DMU pressure transmitters with a range of 0 to 600 bar are designed to convert pressure to a continuous electrical value. Protection IP65, input voltage 10-30 VDC,...
The WIKA DMUB pressure transducers with a range of 0 to 6 bar are designed to convert pressure into a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
The WIKA DMUB pressure transducers with a range of 0 to 1 bar are designed to convert pressure into a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
The WIKA DMUB pressure transducers with a range of 0 to 1.6 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
The WIKA DMUB pressure transducers with a range of 0 to 10 bar are designed to convert pressure into a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
WIKA DMUB pressure transmitters with a range of 0 to 100 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
The WIKA DMUB pressure transducers with a range of 0 to 250 bar are designed to convert pressure into a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
WIKA DMUB pressure transmitters with a range of 0 to 400 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
The WIKA DMUB pressure transducers with a range of 0 to 60 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
The WIKA DMUB pressure transducers with a range of 0 to 600 bar are designed to convert pressure into a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
Pressure switch with expansion function for pressure range -100 to 350 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The connection is equipped with two internal threads M20 × 1.5 and G 1/2" left.
The connection is equipped with two internal threads G 1/2" and M20 × 1.5 left.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with 1/4" pipe thread rear connection.
The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with rear connection via 1/8" pipe thread.
Digital manometer with 74 mm diameter, 0 to 60 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial applications...
Stainless steel glycerine manometer with 160 mm pointer and pressure measurement range -1/0.6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Panel gauge with front flange, glycerine, 63 mm indicator with pressure measurement range 0/1 bar with 1.6% deviation. Side connection 1/4". Stainless steel body and front...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/4 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media...
Version in red. Simple signal device for optical indication of the presence of pressure in the red signal.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is stainless steel 1.4571.
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
The MAKP-1V-18 digital pressure gauge has a range of 0 to 10 bar with 1/4" pipe thread rear connection.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
Stainless steel glycerine manometer with 100 mm indicator with pressure measurement range 0/4 bar with 1.0% deviation. Rear connection 1/2". Suitable for demanding aggressive...
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
Rear mount with 90° angle for MAKP digital manometers.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is made of steel.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of stainless steel 1.4571.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of steel.
Robust manometer with 160 mm diameter steel body with 1/2" rear connection and measuring range 0/10 bar with 1% deviation. Suitable for mechanically demanding applications for...