SICOALU2 compressed air piping
|
 |
SICOALU2 perfectly meets the requirements for a multifunctional piping system. As the name suggests, the base is made of low-slope aluminium profiles. The high modulation capability adds to the practicality of the system and the whole solution is not only maximally functional but also aesthetic. If you require these features in your operation, this system is the best. It is capable of conducting not only air, but also nitrogen and water.
#ShowMore#
Piping system SICOALU2
SICOALU2 is a modern multifunctional piping system, consisting of an aluminium profile with two parallel openings with diameters of 25 and 16 mm, designed not only for compressed air distribution. Thanks to two independent pipelines in one profile, it is possible to distribute e.g. compressed air with two different working pressures or to use a second pipeline for nitrogen or water distribution. Thanks to this concept, the possibility of hanging various accessories on the profile and the good aesthetic appearance, the SICOALU2 system is particularly suitable for the craft industry, car repair shops, tire shops, maintenance workshops, laboratories and office or interior workplaces.
Easy installation and perfect appearance |
2 pipes for different media |
 |
 |
| No special tools are required to connect the SICOALU2 system. The connection of the profiles is made only with self-tapping screws supplied with the couplings. The excellent design of the aluminium profile ensures that the interior of the workshop or workplace will always look perfect. | Two independent piping channels in the profile can be used either for the distribution of compressed air with different pressures or for the distribution of different operating media in one pipe - e.g. nitrogen for tyre inflation or laboratory purposes or water for car washing. |
Multifunctional use |
Practical modifications |
 |
 |
| With SICOALU2, you can better organize your workplace and profiles can also be used for hanging various accessories that otherwise obstruct the space. Storage shelves, towel rails or hooks can be attached to the profile for storing hoses or electrical cables. |
You can create work media taps anywhere in the profile and whenever you need. Creating taps can be done with a special drilling tool even under pressure, without disrupting the operation of the workshop. There are several types of profile outputs available in the program. |
Product sorting
List of products
Left straight profile coupling for SICOALU2 distribution. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Right-hand straight profile coupling for SICOALU2 piping. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Hose holder, mountable on the SICOALU2 system, for hose or electrical cable suspension
Manual deburring scraper for air ductwork. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...
Base of the profile clamp for SICOALU2 distribution. Working pressure up to 12,5 bar, rod length 6m. Designed for workshops, maintenance shops, automated workplaces.
Blanking coupling left for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Blanking coupling right for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Direct profile coupling for SICOALU2 distribution. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Left end coupling for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Right end coupling for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
angled tap with internal thread G1/2" for SICOALU2 distribution. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Vertical tap with internal thread 2 x G1/2" for SICOALU2 distribution. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Angle wrench with spherical head for SICOALU2 system
Tap 25 and 16 mm with internal thread G1/2" and G1/4" for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
25 mm tap with internal thread G1/2" for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Aluminum profile allowing the distribution of two different media or media with two different pressures. Working pressure up to 12,5 bar, rod length 6m. Designed for workshops,...
Drilling jig mountable on the SICOALU2 system
Angled tap with external thread G1/2" for SICOALU2 distribution. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Tap 16 mm with internal thread G1/2" for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Tool shelf mountable on SICOALU2 system
Shelf with towel holder mountable on SICOALU2 system
Connecting elbow 90° for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
25 mm tap with internal thread G3/4" for SICOALU2. Working pressure up to 12.5 bar. Designed for workshops, maintenance shops, automated workplaces.
Profile clamp for SICOALU2 distribution. Working pressure up to 12,5 bar, rod length 6m. Designed for workshops, maintenance shops, automated workplaces.