Door accessories, Page 2
Product sorting
List of products
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Aluminium profile for handle creation, with a 25x42 cut
Door stop for removable door installation, made of brass.
Aluminium hinge with dimensions 81x36, for profiles 32/32.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 32/32.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 32/45.
Aluminium hinge with dimensions 81x50, for profiles 32/45.
Plastic hinge made of polyamide with dimensions 40x40, for profiles 32/32.
Insert for inserting the pivot of folding doors with a diameter of D=8 mm.
Semi-circular aluminium profile for creating hinged doors from plastic panels up to 15 mm thick.
Sliding pin for mounting sliding doors with a distance of 21.5 mm from the AC 45-8 profile.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Handle made of black polyamide with dimensions of 129x44 mm.
Aluminium hinge with dimensions 81x44, for profiles 32/32.
Aluminium hinge with dimensions 81x62, for profiles 32/45.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.
Handle made of black polyamide, dimensions 146x44 mm.
Sliding profile for guiding doors made of AC 45-8 profiles with a cutting edge of 18.5 mm.
Counterbalance weight with a mass of 1kg for mounting into AC 45-8 series profiles with a 45x90 section.
Aluminium hinge with dimensions 76x62, for profiles 32/45.
Counterbalance kit for sliding doors designed for installation in AC 45-8 series profile with a 45x90 section.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Chain for counterweights with a width of 6 mm.
Set of 2 end parts for counterweight (right + left) for mounting on profile AC 45-8 with a 45x90 cut.
Aluminium hinge with dimensions 100.5x44, for 32/32 profiles.
Aluminium hinge with dimensions 100.5x62, for profiles 32/45.
Clip for securing cables to aluminium profiles.
Complete counterweight set for sliding doors weighing up to 12 kg. Designed for installation in profile series AC 45-8 with a 45x90 cut.
Door hinge for profile 084.101.064 with a 45x55 section.
A sliding latch with a spring for closing doors, made of polyamide.
Mounting bracket for gas spring to aluminium profile.
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Handle made of black polyamide, dimensions 108x38 mm.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Angled grab bar made of grey polyamide, measuring 128x43 mm.