AC profiles and accessories, Page 13
Product sorting
List of products
Aluminium profile with a modular section dimension of 45x45, with rounded corners and 2 adjacent grooves in the shape of AC 45-8.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 32/32.
AC 45-8 groove profile for mounting an 8 mm thick panel.
Corner connector for connecting 2 profiles of the AC 30-6 series with a 30x30 cut at a 90° angle.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
Block for fixing a panel with a thickness of 1 to 5 mm to the central groove of the AC 45-8 series profile.
Counterbalance weight with a mass of 1kg for mounting into AC 45-8 series profiles with a 45x90 section.
Corner connector for connecting 3 profiles of the AC 30-6 series with a 22.5x22.5 cut at a 90° angle.
Corner connector for connecting 2 profiles of the AC 30-6 series with a 22.5x22.5 cut at a 90° angle.
Aluminium profile with a modular cross-section dimension of 30x60, with rounded corners and 6 grooves in the shape of AC 30-6.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Flange for round profiles AC 45-8 with 45x90 cut for mounting bases using M16 thread.
Chain for counterweights with a width of 6 mm.
Counterbalance kit for sliding doors designed for installation in AC 45-8 series profile with a 45x90 section.
Set of 2 end parts for counterweight (right + left) for mounting on profile AC 45-8 with a 45x90 cut.
Aluminium profile with a modular section dimension of 30x30 and with 2 grooves in the shape of AC 30-6.
Aluminium profile with a modular section size of 45x120 and 6 grooves in the shape of AC 45-8.
Aluminium profile with a modular cross-section dimension of 32x90 and with 5 grooves in the shape of AC 45-8.
Aluminium hinge with dimensions 100.5x44, for 32/32 profiles.
Aluminium hinge with dimensions 100.5x62, for profiles 32/45.
Adjustable foot 40x100 mm with M8 thread
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Centre flange for mounting pedestals with M8 thread and castors with 60x60 flange, to round profile series AC 30-6, with 30x30 cut.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.
Complete counterweight set for sliding doors weighing up to 12 kg. Designed for installation in profile series AC 45-8 with a 45x90 cut.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Corner connector for connecting 3 profiles of the AC 45-8 series with a 32x32 semi-circular cut at a 90° angle.
Corner connector for connecting 3 profiles of the AC 45-8 series with a 45x45 semi-circular cut at a 90° angle.
Connector for joining AC 40-8 and AC 45-8 series profiles in a horizontal direction at any angle.
Coupling for connecting profiles of the AC 40-8 and AC 45-8 series in the vertical direction at any angle.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 45/45.
Coupling for connecting AC 30-6 series profiles in a vertical direction at any angle.
Aluminium profile with a modular section dimension of 90x90 with 8 grooves in the shape of AC 45-8. Lightweight version weighing 4.96 kg/m.
Semi-circular aluminium profile with a modular section dimension of 45x45 and 2 AC 45-8 shaped grooves.
Corner flange for mounting M16 threaded pedestals and 60x60 flanged castors, for round profile series AC 45-8, with 45x45 cut.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Coupling for connecting AC 30-6 series profiles in a horizontal direction at any angle.
Aluminium profile with a modular section dimension of 90x90 in a corner design with AC 45-8 shaped grooves.
Plastic cap for round profiles 45x90 in black
