AC profiles and accessories, Page 2
Product sorting
List of products
Spacing base for block 084.510.001 with a height of 5 mm.
Polyamide handle with dimensions 113x35 mm, blue colour.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Open polyamide handle with dimensions 130x48 mm, grey colour.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Rubber base pad insert with a diameter of 50 mm.
Handle made of black polyamide, dimensions 108x38 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Cover strip for closing channel profile 80x80.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Plastic cap for bases 084.409.004 and 084.409.002.
Connector for creating a swivel joint between profiles with a 40x80 section.
Square base for mounting on 80x80 section profiles.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Universal angle bracket with a 90° angle and dimensions of 78x78 for connecting profiles from the outside using M8x20 screws.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Rubber base pad insert with a diameter of 100 mm.
Rubber base pad insert with a diameter of 80 mm.
Washer for fixing glass panels to block 084.509.001.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.