AC profiles and accessories, Page 3
Product sorting
List of products
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
PVC seal for profile grooves for attaching 4 mm thick panels to 6 mm wide grooves or 6 mm thick panels to 8 mm grooved profiles.
Open polyamide handle with dimensions 130x48 mm, grey colour.
Square nut for AC 40-8, AC 45-8 grooves with M4 thread made of galvanised steel
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Aluminium profile with a modular cross-sectional dimension of 40x80 40x120 with 8 T-slots of type AC 40-8.
Aluminium profile with a modular cross-section dimension of 40x80 and 8 AC 40-8 shaped grooves. Heavy-duty version weighing 3.01 kg/m.
Aluminium profile with a modular cross-sectional dimension of 80x80 with 8 AC 40-8 shaped grooves. Standard version with a weight of 3.61 kg/m.
Aluminium profile with a modular cross-sectional dimension of 80x80 with 8 AC 40-8 shaped grooves. Heavy-duty version with a weight of 5.04 kg/m.
Rubber base pad insert with a diameter of 50 mm.
Rectangular nut M6 for AC 40-8, AC 45-8 grooves, with guide, length 20 mm
Rectangular nut M5 for AC 40-8, AC 45-8 slots, with guide, length 20 mm
Groove connector for connecting AC 40-8 and AC 45-8 series profiles at a 45° angle.
Groove connector for direct connection of AC 40-8 and AC 45-8 series profiles.
Handle made of black polyamide, dimensions 108x38 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Cover strip for closing channel profile 80x80.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Jig for precise drilling of holes into aluminium profiles with AC 40-8 groove.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Plastic cap for bases 084.409.004 and 084.409.002.
Connector for creating a swivel joint between profiles with a 40x80 section.
Square base for mounting on 80x80 section profiles.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Plastic cap for light profiles 80x80 in black
Plastic end cap for light profiles 80x80 in grey
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Groove connector for connecting AC 40-8 and AC 45-8 series profiles at a 60° angle.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Plastic cap for heavy-duty 80x80 profiles in black
Adjustable foot 40x100 mm with M8 thread
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.