AC profiles and accessories, Page 3
Product sorting
List of products
Square cap for corner connector 084.310.013 made of grey polyamide.
Door stop for removable door installation, made of brass.
Flange for attaching bases and castors to 45x90 profiles with M20 thread.
Connecting plate for creating a perpendicular joint between profiles with a 45x45 section.
The 45x45 aluminium profile allows for the creation of channels with cables.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Round cap for corner joint 084.310.013 made of black polyamide.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8x20 screws.
Polyamide rotary latch for closing doors.
The 60x60 aluminium profile allows for the creation of channels with cables.
Aluminium end cap for 60x60 channel profile.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Round cap for corner connector 084.310.013 made of grey polyamide.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Plastic cover for angle bracket 86x86 in black.
Gas spring with 110 mm stroke and 200 N force.
Two-part base for mounting on profiles with 45x90, 45x135 and 45x180 sections.
Joining plate for creating a perpendicular joint between profiles with a 45x90 section.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 300 N force.