AC profiles and accessories, Page 4
Product sorting
List of products
Plastic cap for round profiles 30x60 in black
Plastic end cap for 30x30 profiles in black
Grey plastic end cap for closing the groove of AC 45-8 series profiles in a lightweight design.
Plastic end cap for 32x45 profiles in black
Sliding block for mounting sliding doors directly to the AC 45-8 profile.
Square cover cap for corner connector 084.310.022 made of black polyamide.
Plastic end cap for 45x45 profiles in black
Square cap for corner joint 084.310.022 made of grey polyamide.
Short nut M5 for grooves AC 40-8, AC 45-8, with guide.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Plastic handle cover 084.505.001, orange colour.
Corner connector for connecting 2 profiles of the AC 45-8 series with a 18.5x32 cut at a 90° angle. Made from black polyamide.
Corner connector for connecting 2 profiles of the AC 45-8 series with a 18.5x32 cut at a 90° angle. Made from grey polyamide.
Plastic cap for 18.5x45 profiles with 2 grooves in grey
Shimming base for block 084.510.001 with a height of 3 mm.
Spacing base for block 084.510.001 with a height of 2 mm.
Spacing base for block 084.510.001 with a height of 5 mm.
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Polyamide rotary latch for closing doors.
Mounting plate for limit switch for hinged doors 084.603.001 with a height of 10 mm.
Connecting latch for AC 30-6 series profiles, with M5x20 screw.
Square nut for AC 40-8, AC 45-8 grooves with M4 thread made of galvanised steel
Plastic end cap for 18.5x90 profiles in black
Handle made of black polyamide, dimensions 146x44 mm.
Plastic profile for installing wire mesh into aluminium profiles with grooves series AC 40-8 and AC 45-8.
PVC seal for profile grooves for attaching 4 mm thick panels to 6 mm wide grooves or 6 mm thick panels to 8 mm grooved profiles.
Three-part connector for creating perpendicular joints of round profiles series AC 30-6 with a 30x30 cut.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Black plastic end cap for closing the groove of AC 45-8 series profiles.
Door stop 30x14 with hole for magnet D=18 mm, made of grey polyamide.
Aluminium profile with a modular cross-section size of 30x60 and 6 grooves in the shape of AC 30-6.
Flat aluminium end cap for closing the groove of AC 45-8 and IM 40-8 series profiles.
Plastic cap for 22.5x22.5 profiles in black
Plastic cap for profiles 22.5x22.5 in grey
Connecting latch for AC 40-8 and AC 45-8 series profiles, with M6x25 screw.