AC profiles and accessories, Page 4
Product sorting
List of products
Spacing base for block 084.510.001 with a height of 2 mm.
Spacing base for block 084.510.001 with a height of 5 mm.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 300 N force.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Gas spring with 110 mm stroke and 200 N force.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Plastic hinge made of polyamide with dimensions 50x70, for 40/40 profiles.
M8x50 zinc-plated steel cylindrical head screw
Connector for creating a swivel joint between profiles with a 40x80 section.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.
Stainless steel M8x35 cylindrical head screw
Rubber base pad insert with a diameter of 50 mm.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Aluminium drill bit with a diameter of D=7.5 mm.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.
Drill bit for aluminium with a diameter of D=5.5 mm.
Aluminium profile with a 30x50 section for creating fencing.
Aluminium profile with a 50x50 section for creating fencing.
Door lock, rotary, for triangular wrench, steel design.
Drill bit with a diameter of D=11 mm for creating holes for M8 threaded inserts.
Drill bit with a diameter of D=7 mm for creating holes for M5 threaded inserts.
Drill bit with a diameter of D=9 mm for creating holes for M6 threaded inserts.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, grey colour.