AC profiles and accessories, Page 4
Product sorting
List of products
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Gas spring with 110 mm stroke and 200 N force.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 300 N force.
Gas spring with 110 mm stroke and 50 N force.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Plastic cap for angle bracket 40x38.5 in black.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
The 80x80 aluminium profile allows for the creation of cable channels.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x40 section.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Gas spring with a stroke of 200 mm and a force of 250 N.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Gas spring with a stroke of 200 mm and a force of 350 N.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Square base for mounting on 80x80 section profiles.
Rubber base pad insert with a diameter of 100 mm.
Plastic cap for angle bracket 38.5x76 in black.
Step drill with diameters D=9 mm and D=13.5 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Square base for mounting on profiles with a 40x40 section.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x80 section.
Door stop with dimensions 56x30 equipped with a magnet.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Adjustable foot 40x100 mm with M8 thread