IM profiles and accessories, Page 2
Product sorting
List of products
Shimming base for block 084.510.001 with a height of 3 mm.
Spacing base for block 084.510.001 with a height of 2 mm.
Spacing base for block 084.510.001 with a height of 5 mm.
Polyamide handle with dimensions 113x35 mm, blue colour.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.
Polyamide handle with dimensions of 113x35 mm, black colour.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.
Polyamide handle with dimensions 113x35 mm, orange colour.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x80 section.
Rubber base pad insert with a diameter of 40 mm.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
PVC seal for profile grooves for attaching 4 mm thick panels to 6 mm wide grooves or 6 mm thick panels to 8 mm grooved profiles.
Open polyamide handle with dimensions 130x48 mm, grey colour.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Rubber base pad insert with a diameter of 50 mm.
Handle made of black polyamide, dimensions 108x38 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Cover strip for closing channel profile 80x80.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Plastic cap for bases 084.409.004 and 084.409.002.
Connector for creating a swivel joint between profiles with a 40x80 section.
Square base for mounting on 80x80 section profiles.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Adjustable foot 40x100 mm with M8 thread
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.