IM profiles and accessories, Page 2

Floor bracket for mounting on 40 mm wide profiles using M8 screws.

Washer for fixing glass panels to block 084.509.001.

Angle bracket for joining profiles with a 40x40 section at a 45° angle.

Blanking plug for 7.5 mm hole, made of black polyamide.

Threaded bushing M8, D = 11 mm.

Step drill with diameters D=9 mm and D=13.5 mm.

Blanking plug for 7.5 mm hole, made of grey polyamide.

Rubber cover for handle pipe with an outer diameter of D=32 mm.

Plastic cap for bases 084.409.004 and 084.409.002.

Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.

Flange for attaching bases and castors to 40x80 profiles with M12 thread.

Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.

Pin for creating a door stop.

Mounting bracket for gas spring to aluminium profile.

Joining plate for perpendicular connection of profiles with an edge width of 40 or 45 mm.

Plastic end cap for 50x50 profile in black

Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.

Polyamide handle with dimensions of 113x35 mm, black colour.

Polyamide handle with dimensions 113x35 mm, blue colour.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Clip for securing cables to aluminium profiles.

Rubber insert for stop pin 084.523.003.

Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.

Threaded insert M6, D = 9 mm.

Polyamide handle with dimensions 113x35 mm, orange colour.

Plastic cap for angle bracket 40x38.5 in black.

Universal angle bracket with a 90° angle and dimensions of 78x78 for connecting profiles from the outside using M8x20 screws.

Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.

Plastic handle cover 084.505.001, orange colour.

Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.

A sliding latch with a spring for closing doors, made of polyamide.

Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.

Handle made of black polyamide, dimensions 146x44 mm.

Open polyamide handle with dimensions 130x48 mm, grey colour.

Polyamide rotary latch for closing doors.

Rubber base pad insert with a diameter of 80 mm.

Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.

Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.

Angled solid handle made of grey polyamide, measuring 128x43 mm.

Cover strip for closing channel profile 80x80.