IM profiles and accessories, Page 4
Product sorting
List of products
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Cover strip for closing channel profile 80x80.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Handle made of black polyamide with dimensions of 129x44 mm.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
The 80x80 aluminium profile allows for the creation of cable channels.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Handle made of black polyamide, dimensions 146x44 mm.
Aluminium end cap for 80x80 duct profile.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Adjustable foot 40x100 mm with M8 thread
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x40 section.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x80 section.
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Clip for securing cables to aluminium profiles.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
A sliding latch with a spring for closing doors, made of polyamide.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Mounting bracket for gas spring to aluminium profile.
The 80x80 aluminium profile with a bevelled edge allows for the creation of channels with cables and connection to the IM 40-8 series profile with an 80 mm edge using 2 grooves.
PVC seal for profile groove to attach 1 mm thick panels into 8 mm wide grooves.
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Handle made of black polyamide, dimensions 108x38 mm.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Angled solid handle made of grey polyamide, measuring 128x43 mm.