IM profiles and accessories, Page 4
Product sorting
List of products
Gas spring with 110 mm stroke and 50 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Gas spring with a stroke of 200 mm and a force of 350 N.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Square base for mounting on 80x80 section profiles.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Plastic cap for angle bracket 38.5x76 in black.
Plastic cap for angle bracket 40x38.5 in black.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
M6 screw cap with cylindrical head and 4 mm tightening hexagon, cap diameter 10 mm.
Step drill with diameters D=9 mm and D=13.5 mm.
Stainless Steel M8x12 Socket Head Cap Screw
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Panel fixing block for thicknesses of 1 to 8 mm.
Stainless Steel M8x25 Cylindrical Head Screw
A sliding latch with a spring for closing doors, made of polyamide.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Angle bracket for mounting limit switches with order numbers 084.601.001 to 084.601.003 and switch 084.602.001.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Aluminium profile with a 50x50 section for creating fencing.
Gas spring with 115 mm stroke and 100 N force.
Pipe for creating a handle, diameter D=32 mm, made of blue lacquered aluminium.
Aluminium profile with a 30x50 section for creating fencing.
Gas spring with 110 mm stroke and 250 N force.
Drill bit for aluminium with a diameter of D=5.5 mm.
Gas spring with 142 mm stroke and 200 N force.
Gas spring with 142 mm stroke and 250 N force.
Gas spring with 142 mm stroke and 350 N force.