Reduction 18 - 22 mm
Code: TA6-1822
Related products
Product detailed description
Straight socket reducer 22 mm for 18 mm air ducts - TA6-1822
- modern system for easy pipe joining
- the connection is made by simply pushing the pipe into the coupling, extremely fast assembly
- without the need for special tools
- detachable design
- body material brass, NBR ring, steel cutting edge
- designed for compressed air piping in industry and crafts
Additional parameters
| Category: | Compressed air piping systems |
|---|---|
| Version: | Reducing |
| Working temperature: | -30 / 70 °C |
| Tube: | 22 mm |
| Conduit: | 18 mm |
| In stock: | External warehouse |
| Length: | 46 mm |
Product rating
Be the first who will post an article to this item!
Pegler Yorkshire is a British maker of fittings, valves and connectors for heating, plumbing and industry, with roots in the late 19th century. Its Tectite range of push-fit fittings joins pipes, fittings and valves without soldering, pressing or special tools.
We offer brass fittings from the Tectite range for TA compressed air lines with 15, 18, 22 and 28 mm pipes: straight couplings, elbows, tees, reducers, stop ends and threaded fittings. A joint can be undone at any time and the fitting reused.
No special toolsTectite range fittings by type
Straight couplings and reducers
Extending a run and changing size. A coupling between two pipes of the same size, a reducer between two sizes.
- straight couplings 15, 18, 22 and 28 mm
- reducers 15–22, 18–22, 18–28 and 22–28 mm
- no tools, just push in
Elbows and tees
Changing direction and branching. 90° and 45° elbows, tees and tees with a smaller branch.
- 90° and 45° elbows for 15 to 28 mm
- tees for 15 to 28 mm
- tees with reduced branch
Threaded fittings
Connecting to a box, valve or machine. Straight couplings and elbows with male or female thread from 1/2″ to 1″.
- male and female threads
- elbows with male thread
- for 15 to 28 mm pipes
Stop ends
End of the run, ready for later extension. A push-fit stop end closes the pipe and can later be swapped for another fitting.
- for 15, 18, 22 and 28 mm pipes
- fitted without tools
- can be removed and reused
Demounting pliers and clips
Undo a joint without damage. The tools press the fitting ring so the pipe can be pulled out.
- pliers for 15, 18, 22 and 28 mm
- demounting clips 15 to 28 mm
- the fitting can be reused
With the fittings you need pipes, clips and outlet boxes. The complete TA system and other piping are in our compressed air piping category.
All piping systemsTectite fittings side by side
| Type, sizes, thread and use | |||
|---|---|---|---|
| Type | Pipes | Thread | Used for |
| Straight coupling | 15, 18, 22, 28 mm | – | extending a pipe |
| Reducer | 15–22, 18–22, 18–28, 22–28 mm | – | changing to another size |
| Straight coupling with male thread | 15, 18, 22, 28 mm | G1/2″, G3/4″, G1″ | connecting a box, valve or machine |
| Straight coupling with female thread | 15, 18, 22, 28 mm | G1/2″, G3/4″, G1″ | connecting to a male thread |
| Elbow 90° and 45° | 15, 18, 22, 28 mm | – | changing direction |
| Elbow with male thread | 15, 18, 22, 28 mm | G1/2″, G3/4″, G1″ | drop to a machine or box |
| Tee and tee with reduced branch | 15–28 mm, branch 15–22 mm | – | branching off the run |
| Stop end | 15, 18, 22, 28 mm | – | closing the end of a pipe |
The fitting body is brass, the ring NBR and the grab ring steel. Working temperature −30 to +70 °C, working pressure 15 to 17 bar depending on the fitting type.
How to make a Tectite joint
1. Cut
Cut the pipe square, ideally with pipe pliers or a pipe cutter.
2. Deburr
Remove burrs from the pipe edge so it does not damage the sealing ring in the fitting.
3. Push in
Push the pipe fully into the fitting. The joint is made, nothing needs tightening.
4. Check
Pull on the pipe to make sure it holds. Then pressurise the line and check the joints.
Frequently asked questions
- Is Tectite a separate brand?
- No. Tectite is a range of push-fit fittings from Pegler Yorkshire, so we list Tectite fittings under this brand.
- Are Tectite fittings suitable for compressed air?
- Yes. The fittings we offer are intended for compressed air lines with a working pressure of 15 to 17 bar. The manufacturer also lists the Tectite range for drinking water and heating.
- Do I need special tools?
- No. Cut the pipe, deburr it and push it in. Pliers or a clip are only needed to undo the joint.
- How do I undo a joint?
- Press the fitting ring with demounting pliers or a clip and pull the pipe out. The fitting can then be reused.
- Which pipes go with the fittings?
- TA system pipes: aluminium or PA12 polyamide with an outside diameter of 15, 18, 22 or 28 mm.
- Where do I find outlet boxes and clips?
- Boxes and clips for the TA system are listed under the TECTITE brand, pipes in the TA pipe category.
Tectite is a range of fittings from Pegler Yorkshire. Dimension tables of the fittings with order numbers are in the TA fittings category.