Connectors and angles, Page 2
Product sorting
List of products
Universal angle bracket with a 90° angle and dimensions of 18x18 for joining profiles from the outside using M5x12 screws (AC 30-6 series) or M5x8 screws (BH 20-6 series)....
Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Plastic cover for angle bracket 86x86 in black.
Plastic cap for 18x18 angle bracket in grey.
Plastic cap for angle bracket 40x38.5 in black.
Plastic end cap for 25x40 angle bracket in grey.
Square cover cap for corner connector 084.310.022 made of black polyamide.
Plastic end cap for 18x40 angle bracket in black.
Plastic end cap for 18x40 angle bracket in grey.
Plastic end cap for 43x43 angle bracket in black.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Angle bracket for joining profiles with a 30x30 section at a 45° angle.
Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Plastic cap for angle bracket 38.5x76 in black.
Connecting plate for creating a perpendicular joint between profiles with a 45x45 section.
Universal angle bracket with a 90° angle and dimensions of 86x86 for connecting profiles from the outside using M8x20 screws.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Plastic cap for 25x40 angle bracket in black.
Connector for creating a swivel joint between profiles with a 40x80 section.
Plastic cap for 43x43 angle bracket in grey.
Universal angle bracket with a 90° angle and dimensions of 43x88 for connecting profiles from the outside using M8x16 screws.
Universal angle bracket with a 90° angle and dimensions of 95x88 for connecting profiles from the outside using M8x16 screws.
Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.
Plastic cap for 18x18 angle bracket in black.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Coupling for creating a swivel joint between BH 45-10 series profiles with a 45x45 section.
Connecting plate for creating a perpendicular joint between profiles with a 50x100 section.
Round cover for corner connector 084.310.022 made of grey polyamide.
Plastic cap for 43x86 angle bracket in black.
Connecting plate for perpendicular connection of profiles with an edge width of 45 or 90 mm.
Horizontal alignment connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Plastic cap for angle bracket 27x27 in grey.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Corner bracket for slot for connecting BH 20-6 series profiles at a 90° angle.
Square cap for corner joint 084.310.022 made of grey polyamide.