Compressed air blast guns
Remove rust, dirt and darkened areas by blasting. It is a simple system working with compressed air and fine, special sand with grains up to 0.8 mm. There is no better or easier way to prepare various metal surfaces for a quality paint job. Choose from our range of blast guns and if you would like to find out more about this range, please click continue.
#ShowMore#
How does a jet gun work?
You may also know sandblasting guns by the popular term sandblasting guns or sandblasters. Their use is simple, you just need to own an air compressor to which you connect the gun. However, be careful if it has sufficient power, because blast guns, even ordinary ones, normally consume around 300 litres of air per minute for continuous operation. With a less powerful compressor, you may still run out of air from the pressure vessel and the compressor will not be able to produce new air. Please note that continuous operation is not desirable for reciprocating compressors as they need some cooling time.
There are two types of blast guns to choose from, each of which works differently. Injector blast guns (with hose connection that draws abrasive under vacuum), or blast gun with pressure vessel for abrasive, used by professionals. Abrasive is conveyed to the nozzle by compressed air.
Materials you can blast:
- iron
- aluminum
- jacket
- concrete
- masonry
- glass
- wood
- ceramic
Do you need a sandbox or not?
A frequent question. Keep in mind that the box is not mobile and the investment can be high unless you build it yourself. It is also not possible to work with larger objects. Its advantage is that you avoid dust in the surroundings. Thanks to recycling, it is also possible to blast with more expensive and higher quality abrasives, which are more effective than sand. Silica sand is commonly used for economic reasons. The advantage of the gun is the primitive mounting to the compressor and subsequent handling, in addition, for occasional use or for smaller items, it is perfectly sufficient.
What else you may find useful:
- spare containers
- spray gun for painting
- hose
- pressure regulators
.jpg)
.jpg)
Product sorting
List of products
Dustless blast gun with different nozzle settings, 1 litre bottom tank, 200 l/min consumption and working pressure from 5.5 to 8 bar.
The inexpensive blast gun is used to remove rust from metal surfaces by blasting with special sand with grains up to 0.8 mm, designed for blasting smaller areas. Design with...
Sandblasting gun SX-4101 — professional pneumatic tool for daily service operation M7 Mighty Seven. Professional quality for daily operation in car repair shops, tire services,...
Copper slag for blasting in 25kg pack. Use as an abrasive for blasting.
Robust blasting gun designed for efficient sandblasting of large areas — easily connect it directly to material hoppers or abrasive bags. Works with abrasives with a grit size...
ABR-BS25 Blasting Material — M7 Mighty Seven Professional Tools. Professional quality for daily operation in car repair shops, tire services, and workshops throughout the Czech...
Accessories for SG990S spray gun. Replacement container 750 ml in lower aluminium version.
Replacement nozzle 7 mm for blasting gun used for removing rust from metal surfaces by blasting with special sand with grain size up to 0.8 mm, designed for blasting smaller...
Replacement plastic container cap for SBG12 blast gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg...
Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of abrasive. Nozzle made of hardened steel with a...
Replacement hardened steel nozzle for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of...
Replacement bottom plastic container 750 ml for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1...