Automation technology - valves and cylinders, Page 18
Product sorting
List of products
Cables for supplying current to the cylinder position sensors, 10m long. Equipped with a standard M8 connector
Cylinder end position sensor with M8 connector. Hall-effect sensing, PNP, for 8-28V DC voltage. Green LED signaling. For direct mounting in cylinder grooves.
Replacement seal set for AMT pneumatic cylinder with diameter 350 mm. The kit is only suitable for resealing the pneumatic cylinder.
A1B1 base plate for mounting A1 valves in 1/8" size. Number of positions: 6. Side connection 1/4". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
A1B1 base plate for mounting A1 valves in 1/8" size. Number of positions: 7. Side connection 1/4". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
Pneumatic valve ISO 2 in 5/2 air/air differential design for separate mounting on industrial valves. SBA2 Baseplates. Dimensions according to ISO 5599/1, designed for mounting...
Replacement seal set for AMX pneumatic cylinder with diameter 80 mm. The kit is only suitable for resealing the pneumatic cylinder.
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for 125 mm cylinders with M27 × 2 connection thread. Supplied in galvanized steel.
A1P pneumatic valves with 1/4" threads in 3/2 NO version with 8 mm clearance and flow rate 1 100 l/min. For stand-alone or battery mounting, use A1B2 base plates. Control of...
Low feet type PB AQCN for cylinder diameter 40 mm. Designed for cylinders according to the CNOMO dimensional standard. Made of steel, for operations with higher mechanical...
A1P pneumatic valves with 1/4" threads in 3/2 air/air version with a clearance of 8 mm and a flow rate of 1,100 l/min. For stand-alone or battery mounting, use A1B2 base plates....
A1P pneumatic valves with 1/4" threads in 5/2 air/spring version with 8 mm clearance and flow rate of 1,100 l/min. For stand-alone or battery mounting, use A1B2 base plates....
A1P pneumatic valves with 1/4" threads in 5/2 air/air version with 8 mm clearance and flow rate of 1,100 l/min. For stand-alone or battery mounting, use A1B2 base plates....
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for cylinders 25 - 32 mm with connection thread M10 x 1,25. Supplied in AISI 316...
Low foot type PB AQUN for cylinder diameter 12 - 16 mm. Designed for cylinders according to the UNITOP dimensional standard. Made of steel, for operations with higher...
A1P pneumatic valves with 1/8" threads in 5/3 middle position closed with a clearance of 6.5 mm and a flow rate of 650 l/min. For stand-alone or battery mounting, use A1B1 base...
Pneumatic valve ISO 1 in 5/2 air/spring version for separate mounting on industrial valves. Base plates SBA1. Dimensions according to ISO 5599/1, designed for mounting on ISO1...
Manually operated valve - version 5/2, push button without locking with 1/4" threads. Working pressure 0 -10 bar, working temperature: -10 to +80 °C, materials used: body -...
Manually operated valve - version 5/3, lever 90°, without lock, middle position under pressure with 1/4" threads. Working pressure 0 -10 bar, working temperature: -10 to +80 °C,...
Manually operated valve - version 5/3, lever 90°, with locking middle position under pressure with 1/4" threads. Working pressure 0 -10 bar, working temperature: -10 to +80 °C,...
Flexible couplings type GB for 20 mm cylinders with M8x1,25 connection thread. Supplied in galvanized steel.
Solenoid valve A1E with 1/2" connection threads in 3/2 NC version with flow rate 2 900 Nl/min and DN 15 mm clearance. Coil ASA12 and connector A12209 are not included. For...
Solenoid valve A1E with 1/2" connection threads in 3/2 NO version with flow rate 2 900 Nl/min and DN 15 mm clearance. Coil ASA12 and connector A12209 are not included. For...
AZH miniature ejector with 10 mm socket couplings and integrated blow-off. Nozzle diameter 1.3 mm and maximum vacuum 48 -kPa. Designed to create a vacuum in small isolated systems.
Rear lugs type CM ALIS for 40 mm cylinder diameter. Designed for cylinders according to ISO 15 552 dimensional standard. Made of aluminium, application for operation with lower...
Flexible couplings type GB for cylinders 25 - 32 mm with connection thread M10x1,25. Supplied in galvanized steel.
A1B1 base plate for mounting A1 valves in 1/8" size. Number of positions: 10. Side connection 1/4". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
