Automation technology - valves and cylinders, Page 24
Product sorting
List of products
Blind end plate for ISO1 valve block. Suitable for blanking the plate of ISO1 pneumatic and electro-pneumatic valves.
Rear lugs type CM ALUN for cylinder diameter 12 - 16 mm. Designed for cylinders according to the UNITOP dimensional standard. Made of aluminium, for operations with lower...
AL vacuum pump without check valve for low vacuum. Designed for working with porous materials. Maximum vacuum 81 -kPa, maximum vacuum flow 1170 l/min. Made of aluminium, NBR...
PAB angled grippers with a diameter of 16 mm and an opening angle of -10° to +30°. Compression force 8 times the working pressure. Design with magnet, sensor type ASC. The...
Replacement set of AMX pneumatic cylinder seals with a diameter of 100 mm. The kit is only suitable for resealing the pneumatic cylinder.
PAC angled grippers with a diameter of 16 mm and an opening angle of -1° to +186°. Compression force 8 times the working pressure. Design with magnet, sensor type ASC. The...
Connection fitting for suction cups with filter screen and internal thread G1/8". Designed for suction cups: SB50, SBL50, SF50, SU50.
Grommet for suction cup connection with connection threads internal M5 and external G1/8". Body thread M12x1.
PPB parallel grippers with a diameter of 16 mm and a stroke of 8 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 10 - 63 mm in automation.
Handles for position sensors for cylinders with pressed profile and for cylinders according to ISO 15 552 and UNITOP with diameter 125-150 mm.
Axial joint couplings type RBI for cylinders with connection thread M14x1,5. Supplied in special zinc alloy.
AM vacuum pump with non-return valve providing medium deep vacuum. Designed to provide high vacuum production, for working with porous materials and large-scale vacuum systems....
AM vacuum pump with non-return valve providing medium deep vacuum. Designed to provide high vacuum production, for working with porous materials and large-scale vacuum systems....
Piston rod fork according to ISO 8140 type FFXISO for cylinders with diameter 50 - 63 mm with connection thread M16x1,5. Made of stainless steel.
SECX AQIS pins for cylinders with a diameter of 200 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of AISI 316 stainless steel, for applications...
Piston rod fork with external thread type FE with connection thread M20x1,5
Piston rod fork with external thread type FE with connection thread M27x2
A1B2 base plate for mounting A1 valves in 1/4" size. Number of positions: 10. Side connection 3/8". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
ISO1 solenoid valve in 5/3 version, middle position closed for ISO1 plates. ASA2 coil, A18209 connector and SBA1 base plates are not included. Order separately. Valve clearance...
Manually operated valve - version 5/3, 90° lever without locking, centre position vented. Working pressure 0 - 10 bar, working temperature: -10 to +80 °C, materials used: body -...
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for cylinders 8 - 10 mm with connection thread M16 x 1,5. Supplied in AISI 316...
Manually operated valve - version 3/2 NC, mushroom, red without locking. Working pressure 0 - 10 bar, working temperature: -10 to +80 °C, materials used: body - aluminium/acetal...
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 12 mm in automation.
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 16 mm in automation.
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 20 mm in automation.
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 25 mm in automation.
Solenoid valve A1E with 1/2" connection threads in 5/3 version, middle position vented, auxiliary pressure supply with flow rate 2 900 Nl/min and DN 15 mm clearance. Coil ASA12...
Handles for position sensors for circular pneumatic cylinders and for cylinders according to ISO 6432 with a diameter of 10 mm in automation.
Replacement seal set for AMA pneumatic cylinder with diameter 80 mm. The kit is only suitable for resealing the pneumatic cylinder.
Replacement set of seals for AMX pneumatic cylinder with diameter 32 mm. The kit is only suitable for resealing the pneumatic cylinder.
Angled PAB grippers with a diameter of 10 mm and an opening angle of -10° to +30°. Compression force 1.6 times the working pressure. Design with magnet, sensor type ASC. The...
PAB angled grippers with a diameter of 20 mm and an opening angle of -10° to +30°. Compression force 17 times the working pressure. Design with magnet, sensor type ASC. The...
Angled PAB grippers with a diameter of 25 mm and an opening angle of -10° to +30°. Compression force 34 times the working pressure. Design with magnet, sensor type ASC. The...
PAC angled grippers with a diameter of 20 mm and an opening angle of -1° to +186°. Compression force 17 times the working pressure. Design with magnet, sensor type ASC. The...
PAC angled grippers with a diameter of 25 mm and an opening angle of -1° to +186°. Compression force 34 times the working pressure. Design with magnet, sensor type ASC. The...
PAB angled grippers with a diameter of 32 mm and an opening angle of -10° to +30°. Compression force 61 times the working pressure. Design with magnet, sensor type ASC. The...
PAC angled grippers with a diameter of 32 mm and an opening angle of -1° to +186°. Compression force 61 times the working pressure. Design with magnet, sensor type ASC. The...