Profile Groove Cap / Profile Seal BH 30-8, IM 40-8, Black
Code: 084.203.024
Product detailed description
End cap made of hardened PVC designed to close the groove of BH 30-8 and IM 40-8 series profiles in black.
Closing the groove prevents dirt from entering the grooves and improves the appearance of the structure made of profiles.
When rotated, it can also be used as a groove seal for BH 30-8 series profiles when installing panels with a thickness of 2-4 mm.
Supplied in 2000 mm long bars.
Compatibility
This product can replace the following products on the market:
| Code | Ord. C. | Note |
|---|---|---|
| ALU | 230822 | clear colour |
| ALV | ABDEINPPN | natural colour |
| ALV | ABDEINPPS | |
| ALV | ABDPP8.30S | |
| REX | 3 842 523 256 | material aluminum |
| REX | 3 842 548 878 | grey colour |
| REX | 3 842 548 879 | |
| REX | 3 842 548 898 | light grey colour |
| REX | 3 842 549 877 | clear finish |
| REX | 3 842 549 878 | red colour |
| REX | 3 842 549 879 | yellow colour |
| REX | 3 842 549 880 | blue colour |
| REX | 3 842 549 881 | orange colour |
| REX | 3 842 554 771 | green colour |
| REX | 3 842 555 274 | for panels 2 to 6 mm |
| REX | 3842548898 | light grey colour |
| REX | 3842523256 | material aluminum |
| REX | 3842548878 | grey colour |
| REX | 3842548879 | |
| REX | 3842549877 | clear finish |
| REX | 3842549878 | red colour |
| REX | 3842549879 | yellow colour |
| REX | 3842549880 | blue colour |
| REX | 3842549881 | orange colour |
| REX | 3842554771 | green colour |
| REX | 3842555274 | for panels 2 to 6 mm |
| FMS | 05.01831.00 | yellow colour |
| FMS | 05.01832.00 | clear colour |
| FMS | 05.01833.00 | clear colour |
| FMS | 05.01836.00 | |
| FMS | 05.01837.00 | |
| FMS | 05.01859.00 | |
| FMS | 05.02232.00 | |
| FMS | 05.02233.00 | grey colour |
| FMS | 05.02233.10 | aluminium colour |
| FMS | 05.02234.00 | yellow colour |
| ITE | 0.0.422.23 | natural colour |
| ITE | 0.0.422.23 | clear colour |
| ITE | 0.0.422.26 | black colour |
| ITE | 0.0.481.01 | blue colour |
| ITE | 0.0.489.43 | yellow colour |
| ITE | 0.0.489.44 | green colour |
| ITE | 0.0.489.45 | grey colour |
| ITE | 0.0.489.46 | red colour |
Warning: the alternative product we offer may have technical deviations from the original product. Please contact us to explain the differences.
Additional parameters
| Category: | Profile groove plugs BH |
|---|---|
| Warranty: | 2 years |
| Barva: | Black |
| In stock: | External warehouse |
| Series: | BH 30-8, IM 40-8 |
| Weight (g/m): | 40.00 |
| Material: | PVC |
| Profile length (mm): | 2 000 |
Product rating
Be the first who will post an article to this item!
ALUSIC is an Italian maker of modular structural systems in aluminium and carbon fibre, based in Mondovì and on the market for over 40 years. Its profiles and connectors let you build workbenches, machine and line frames, safety guards, fencing and stairs.
We offer three profile series with accessories: AC with 6 and 8 mm slots, BH with 6, 8 and 10 mm slots and IM with 5, 6 and 8 mm slots. Plus slot bolts and nuts, connectors, brackets, feet, castors, door parts and LED lights for the slot.
Catalogues in CzechALUSIC series and accessories
AC profiles
The widest series. Over 150 profile shapes with 30, 40 and 45 mm sections and AC 30-6, 40-8 and 45-8 slots.
- hundreds of connecting parts
- parts for fencing, doors and guards
- catalogue in Czech to download
BH profiles
From light to heavy. Profiles with 20 to 50 mm sections and BH 20-6, 30-8, 40-10, 45-10 and 50-10 slots.
- five modular sizes
- light and heavy versions
- catalogue in Czech to download
IM profiles
The compact series. Profiles with 20, 30 and 40 mm sections and IM 20-5, 30-6 and 40-8 slots.
- from thin to heavy profiles
- end caps, nuts, connectors and brackets
- catalogue in Czech to download
HT LED lights
Light right in the slot. The LED lights fit into an 8 mm slot, so the structure stays slim.
- lengths from 250 to 3000 mm
- four colour versions
- IP 55 protection
Doors and machine guards
Hinges, handles, locks. Parts for doors in machine guards: hinges, handles, locks, magnets, gas springs and limit switches.
- for profiles with AC slots
- for BH and IM in their series
- also counterweights and door stops
Not sure which series to choose? All profile series, LED lighting and accessories are in one category.
All aluminium profilesProfile series side by side
| Series, profile section, slots and use | |||
|---|---|---|---|
| Series | Basic section | Slots | Typical use |
| AC | 30×30, 40×40 and 45×45 mm | AC 30-6, AC 40-8, AC 45-8 | benches, fencing, guards and doors |
| BH | 20×20 to 50×50 mm | BH 20-6, 30-8, 40-10, 45-10, 50-10 | light to heavy-duty structures |
| IM | 20×20, 30×30 and 40×40 mm | IM 20-5, 30-6, 40-8 | light and load-bearing structures, machine guards |
The numbers after the series letters give the section and slot width, e.g. AC 45-8 is a 45 mm section with an 8 mm slot.
How to choose profiles and parts
1. Choose a series
Stick to one series. Bolts, nuts and connectors must match the slot shape of the profile.
2. Choose the size
Choose the section and version by the load: thin and light for frames and guards, heavy for load-bearing structures.
3. Connect
Join the profiles with brackets, connectors or joining plates and slide the nuts into the slot.
4. Complete
Finish the structure with end caps, feet or castors, panels, doors and LED lighting.
Frequently asked questions
- What is the difference between the AC, BH and IM series?
- The slot shape and the sizes. Some parts fit several series, but always check which slot they are made for.
- Is there a profile catalogue in Czech?
- Yes. The AC, BH and IM series categories and the HT LED lighting category contain the maker’s catalogue in Czech as a PDF.
- What do thin, light and heavy profile mean?
- Profiles with the same section and slot differ in wall cross-section. A heavy profile carries more, a light or thin one saves weight.
- How do I fit an LED light into a profile?
- The HT light goes straight into the 8 mm slot and connects to a power supply. Choose the supply by the light length, for example 20 W for lengths of 250 to 1000 mm.
- How do I drill profiles accurately?
- The Profile machining categories contain drilling jigs that set the drilling position, drills and adhesives for bonded joints. The maker can also machine profiles automatically from STEP files.
- Does ALUSIC make other systems too?
- Yes. The maker also has the EVO SP system for safety guards, IS stairs and platforms, carbon fibre profiles, conveyors, linear axes, overhead crane runways, lean manufacturing tubes and joints, solar mounting structures and SICOMAT compressed air piping.
Catalogues in Czech for the AC, BH, IM series and HT LED lighting can be downloaded in the series categories. The maker publishes company and product videos on its YouTube channel.
| Manufacturing company : | Alusic S.p.A. |
|---|---|
| Address : | Via Bologna, 10/D, 12084 Mondovì (CN), Italy |
| E-mail : | contact@alusic.com |