BH 40-10, Page 3
Product sorting
List of products
A sliding latch with a spring for closing doors, made of polyamide.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Plastic end cap for 80x80 profiles in grey
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Aluminium bracket with dimensions 81x81, for 40/40 profiles.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Door stop for removable door installation, made of brass.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Rubber base pad insert with a diameter of 100 mm.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Aluminium hanger with dimensions 100.5x81, for 40/40 profiles.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Positioning base for fixing blocks with a height of 2 mm.
Spacing pedestal for fixing blocks with a height of 3 mm.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.
Square nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10, equipped with guide and spring.
Mounting bracket for gas spring to aluminium profile.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Cover strip for closing channel profile 80x80.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Square nut M5 for BH 40-10, BH 45-10 and BH 50-10 slots, equipped with guide and perpendicularly positioned spring.
Square nut M10 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and perpendicularly positioned spring.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 300 N force.
Gas spring with 110 mm stroke and 50 N force.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x20 made of stainless steel
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of stainless steel