BH 45-10, Page 3
Product sorting
List of products
Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8/M10 screws. Design with guide tabs.
Square nut M4 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Universal angle bracket with a 90° angle and dimensions of 42x41 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Horizontal alignment connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Square cover for corner connector 084.310.013 made of black polyamide.
Clip for securing cables to aluminium profiles.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
A sliding latch with a spring for closing doors, made of polyamide.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Aluminium end cap for channel profile 45x45.
Universal angle bracket with a 90° angle and dimensions of 42x41 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Round cap for corner coupling 084.310.013 made of black polyamide.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Door stop for removable door installation, made of brass.
Flange for attaching bases and castors to 45x90 profiles with M20 thread.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Square cap for corner coupling 084.310.013 made of grey polyamide.
Aluminium end cap for 60x60 channel profile.
Rubber base pad insert with a diameter of 100 mm.
Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
The 45x45 aluminium profile allows for the creation of channels with cables.
The 60x60 aluminium profile allows for the creation of channels with cables.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Joining plate for creating a perpendicular joint between profiles with a 45x90 section.
Positioning base for fixing blocks with a height of 2 mm.
Spacing pedestal for fixing blocks with a height of 3 mm.
Aluminium profile with a modular section dimension of 45x45 and 2 adjacent BH 45-10 shaped grooves.
Aluminium profile with a modular section dimension of 45x45 and with 1 BH 45-10 shaped groove.
Aluminium profile with a modular section size of 45x45 and 3 grooves in the shape of BH 45-10.
Square nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10, equipped with guide and spring.
Mounting bracket for gas spring to aluminium profile.