Plastic filter FWA14P up to 13 bar - 20 µm - G 1/4" G 1/4" · up to 13 bar · 20 µm filtration · 1200 l/min · 100 × 40 mm
Code: FWA14P
Related products
Product detailed description
A compact compressed air filter with a G 1/4" thread and a 20 µm element. It uses centrifugal force to separate dirt and condensate into a transparent 16 cm³ bowl with a semi-automatic drain. Flow 1200 l/min.
Specifications
| FWA14P — specifications | |
|---|---|
| Type | Filter |
| Connection | G 1/4" female thread |
| Inlet pressure | up to 13 bar |
| Flow | 1200 l/min |
| Height × width | 100 × 40 mm |
| Filter rating | 20 µm |
| Spare filter element | 20 µm VFP20, finer 5 µm VFP5 |
| Bowl volume | 16 cm³ |
| Condensate drain | semi-automatic, push button also under pressure |
| Body material | plastic, transparent bowl |
| Working temperature | −10 to +50 °C |
| Medium | compressed air |
What it is for
It belongs at the start of the air treatment, before the regulator and lubricator, and protects tools and instruments from water and dirt. The G 1/4" thread is suitable for a workstation with pneumatic tools or for a small compressor.
The spare filter element is VFP20; for cleaner air there is the finer VFP5. The replacement bowl is NFP. The filter combined with a regulator in one body is FDM14P, and the same body with a G 1/8" thread is FWA18P.
Ventilek’s tip
Drain under pressure too. Press the drain button to release the condensate without having to shut off the supply.
Additional parameters
| Category: | Compact plastic compressed air treatment units I3 up to 13 bar |
|---|---|
| Version: | Filter |
| Pressure: | 13 bar |
| Dimensions: | 100 × 40 mm |
| Filtering ability: | 20 µm |
| Filter insert: | Replacement insert 20 µm (VFP20) |
| Medium: | Compressed air |
| Vessel volume: | 16 cc |
| Condensate discharge: | Semi-automatic |
| Working temperature: | -10 / 50 °C |
| Flow: | 1,200 l/min |
| Thread: | G 1/4" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company employs more than 700 peopleThe company Metal Work has been engaged in the production of devices for treating compressed air and fittings since 1967, when it first started its operations. Since then, the Italian manufacturer has evolved over several decades to finally become one of the leading tyre manufacturers. Today, it employs over 350 people at its plant, with another 4 hundred working in its Italian and foreign offices. Expert and competent advice and availability of services is ensured by our extensive network of 46 branches in Italy and abroad, with which we cooperate. Currently, you can find the brand Metal Work on the following products: actuators, valves, adjustment units, fittings and accessories and pneumatic actuator KIT. |
 |
 |
The certificate guarantees quality assurance
Over the years, the entire production process has increased in quality to such an extent that the brand has become synonymous with certainty and quality in its field. In advance, the development department ensures that the most advanced technologies that the market will require in the future are always taken care of with confidence. The quality of the products themselves was certified by the German DEKRA (TGA) when their products were awarded ISO 9001 certification in 1992. Another certificate, this time in the environmental field, was obtained by the company in accordance with ISO 14001 in 2001.