GCE

GCE (Gas Control Equipment) manufactures valves and fittings for industrial gases. The ProControl cylinder pressure regulators are designed for all common industrial gases up to a cylinder pressure of 300 bar and have been type-tested according to ISO 2503.

From the GCE brand, we offer ProControl cylinder pressure regulators for oxygen, nitrogen, air, argon and CO₂, helium, acetylene, hydrogen and forming gas – with pressure gauges in a rubber guard, a shut-off valve at the outlet and a relief valve – plus a spare gauge guard for them.

GCE ProControl cylinder pressure regulators for acetylene, oxygen and argon with flowmeter

Cylinders up to 300 bar

300 barmaximum cylinder pressure

8groups of industrial gases

ISO 2503type tests

2pressure gauges in a rubber guard

GCE ProControl cylinder pressure regulators

For oxygen

200 and 300 bar cylinders. Pressure regulators for oxygen with an outlet of 0–10 and 0–20 bar.

connection G 3/4" or W 30 × 2
outlet G 1/4"
free of oil and grease

View regulator

For acetylene

0–1.5 bar. Pressure regulator for acetylene with clamp connection to the cylinder.

inlet up to 25 bar
outlet G 3/8" LH
relief valve

View regulator

With flowmeter

Argon and CO₂. For shielding gas in welding: flow rate 0–30 l/min, forming gas 0–50 l/min.

flowmeter at the outlet
cylinder contents gauge
200 bar cylinders

View regulator

Gauge guard

Spare part. Rubber guard that protects both pressure gauges against impact.

for ProControl regulators
not for flowmeter versions
rear cap against dust

View part

Not sure which regulator suits your cylinder? In the category you will find a table gas → cylinder connection → regulator.

All cylinder regulators

GCE ProControl regulators at a glance

Cylinder pressure regulators by gas
Gas	Cylinder	Outlet	Outlet connection
air, oxygen, nitrogen	200 and 300 bar	0–10 to 0–50 bar	G 1/4"
argon and CO₂, helium	200 bar	0–10 and 0–20 bar or 0–30 l/min	G 1/4"
acetylene	25 bar (clamp)	0–1.5 bar	G 3/8" LH
hydrogen, methane, natural gas	200 and 300 bar	0–1.5 to 0–20 bar	G 3/8" LH
forming gas	200 bar	0–50 l/min	G 3/8" LH

Cylinder connections according to DIN 477-1 (200 bar) and DIN 477-5 (300 bar). Each regulator is designed only for the gas stated.

How to choose a GCE cylinder pressure regulator

1. Gas

A regulator is always designed for just one gas or group of gases. Flammable gases have a left-hand thread (LH).

2. Cylinder pressure

300 bar cylinders have a different connection (W 30 × 2) from 200 bar cylinders.

3. Pressure or flow rate

For gas-shielded welding and forming, you set the flow rate in l/min; otherwise, the outlet pressure.

4. Instructions

Open the manufacturer’s operating instructions via the QR code on the regulator label.

Frequently asked questions

Do GCE regulators have a relief valve?: Yes, according to the manufacturer, all ProControl versions have a relief valve.
Why do the pressure gauges have a rubber guard?: The pressure gauges are the most sensitive part of the regulator. The guard protects them against impact during transport, cylinder changes or handling, and the rear cap keeps out dust.
Do the regulators comply with a standard?: Yes, ProControl regulators have been type-tested according to ISO 2503, and the pressure gauges comply with ISO 5171.

Technical data according to the data sheet of the manufacturer GCE (ProControl series).

20 items total

GCE

GCE ProControl cylinder pressure regulators

For oxygen

For acetylene

With flowmeter

Gauge guard

GCE ProControl regulators at a glance

How to choose a GCE cylinder pressure regulator

1. Gas

2. Cylinder pressure

3. Pressure or flow rate

4. Instructions

Frequently asked questions

Product sorting

List of products

Listing controls

News Overload

We select articles from our advice room