Cylinder pressure regulator for oxygen, 300 bar, 0-10 bar
Code: FDMHSAU10
Related products
Product detailed description
The FDMHSAU10 cylinder pressure regulator is screwed directly onto the valve of a cylinder containing oxygen and reduces its pressure – up to 300 bar – to an adjustable working pressure of 0–10 bar. It is designed only for oxygen.
It belongs to the GCE ProControl series of cylinder pressure regulators. It is equipped with pressure gauges with a robust rubber guard, a shut-off valve at the outlet and a relief valve; the regulator has been type-tested according to ISO 2503.
Specifications
| Parameter | Value |
|---|---|
| Code | FDMHSAU10 |
| Manufacturer | GCE, ProControl series |
| Gas | oxygen |
| Cylinder pressure | max. 300 bar |
| Cylinder connection | W 30 × 2 female (⌀ 17.3/18.7) (DIN 477-5) |
| Outlet pressure | 0–10 bar |
| Outlet | G 1/4" male |
| Pressure gauges | cylinder contents and working pressure gauges, rubber guard |
| Shut-off valve | at the outlet, included |
| Relief valve | yes |
| Standard | ISO 2503 |
| Operating temperature | −20 to +60 °C |
| Material | body forged brass, spring housing Zn/Al die-casting |
| Weight | 1.7 kg |
Safe use
- use the regulator only for oxygen; the W 30 × 2 female (⌀ 17.3/18.7) connection complies with DIN 477-5 for this gas – do not use adapters or intermediate pieces
- keep the regulator, cylinder and hoses free of oil and grease, do not use any lubricant during installation – with oxygen there is a risk of fire
- the point of use for oxygen is protected by a flashback arrestor – a safety device against flashback according to ISO 5175-1
- open the operating instructions of the manufacturer GCE via the QR code on the regulator label
Spare parts and accessories
- sealing ring for the cylinder connection: FDMHDR
- spare rubber gauge guard: FDMGS
- for the same gas with a different range or cylinder pressure: FDMSAU10
- for the same gas with a different range or cylinder pressure: FDMSAU20
- spare pressure gauges: pressure gauges for industrial gases
- hoses: GOX pressure hoses for oxygen
For high pressure from a network or cylinder bundle, there are HP high-pressure regulators.
Additional parameters
| Category: | Cylinder pressure regulators for industrial gases 200 and 300 bar |
|---|---|
| EAN: | 4050571943097 |
| Pressure: | 300 bar |
| Weight: | 1,7 kg |
| Material: | Brass |
| Medium: | Oxygen |
| Standard: | EN ISO 2503 |
| Working temperature: | -20 / 60 °C |
| Regulatory range: | 0 to 10 bar |
| Product type: | Pressure regulator |
| Thread: | G 1/4" |
| Regulator type: | Cylinder regulator (for gas cylinders) |
| Outlet pressure: | 0.1–1 bar, 1–3 bar, 3–6 bar, 6–10 bar |
| Pressure gauge included: | Yes |
| Cylinder connection: | W 30 × 2 internal |
Product rating
Be the first who will post an article to this item!
GCE (Gas Control Equipment) manufactures valves and fittings for industrial gases. The ProControl cylinder pressure regulators are designed for all common industrial gases up to a cylinder pressure of 300 bar and have been type-tested according to ISO 2503.
From the GCE brand, we offer ProControl cylinder pressure regulators for oxygen, nitrogen, air, argon and CO₂, helium, acetylene, hydrogen and forming gas – with pressure gauges in a rubber guard, a shut-off valve at the outlet and a relief valve – plus a spare gauge guard for them.
Cylinders up to 300 barGCE ProControl cylinder pressure regulators
For oxygen
200 and 300 bar cylinders. Pressure regulators for oxygen with an outlet of 0–10 and 0–20 bar.
- connection G 3/4" or W 30 × 2
- outlet G 1/4"
- free of oil and grease
For acetylene
0–1.5 bar. Pressure regulator for acetylene with clamp connection to the cylinder.
- inlet up to 25 bar
- outlet G 3/8" LH
- relief valve
With flowmeter
Argon and CO₂. For shielding gas in welding: flow rate 0–30 l/min, forming gas 0–50 l/min.
- flowmeter at the outlet
- cylinder contents gauge
- 200 bar cylinders
Gauge guard
Spare part. Rubber guard that protects both pressure gauges against impact.
- for ProControl regulators
- not for flowmeter versions
- rear cap against dust
Not sure which regulator suits your cylinder? In the category you will find a table gas → cylinder connection → regulator.
All cylinder regulatorsGCE ProControl regulators at a glance
| Cylinder pressure regulators by gas | |||
|---|---|---|---|
| Gas | Cylinder | Outlet | Outlet connection |
| air, oxygen, nitrogen | 200 and 300 bar | 0–10 to 0–50 bar | G 1/4" |
| argon and CO₂, helium | 200 bar | 0–10 and 0–20 bar or 0–30 l/min | G 1/4" |
| acetylene | 25 bar (clamp) | 0–1.5 bar | G 3/8" LH |
| hydrogen, methane, natural gas | 200 and 300 bar | 0–1.5 to 0–20 bar | G 3/8" LH |
| forming gas | 200 bar | 0–50 l/min | G 3/8" LH |
Cylinder connections according to DIN 477-1 (200 bar) and DIN 477-5 (300 bar). Each regulator is designed only for the gas stated.
How to choose a GCE cylinder pressure regulator
1. Gas
A regulator is always designed for just one gas or group of gases. Flammable gases have a left-hand thread (LH).
2. Cylinder pressure
300 bar cylinders have a different connection (W 30 × 2) from 200 bar cylinders.
3. Pressure or flow rate
For gas-shielded welding and forming, you set the flow rate in l/min; otherwise, the outlet pressure.
4. Instructions
Open the manufacturer’s operating instructions via the QR code on the regulator label.
Frequently asked questions
- Do GCE regulators have a relief valve?
- Yes, according to the manufacturer, all ProControl versions have a relief valve.
- Why do the pressure gauges have a rubber guard?
- The pressure gauges are the most sensitive part of the regulator. The guard protects them against impact during transport, cylinder changes or handling, and the rear cap keeps out dust.
- Do the regulators comply with a standard?
- Yes, ProControl regulators have been type-tested according to ISO 2503, and the pressure gauges comply with ISO 5171.
Technical data according to the data sheet of the manufacturer GCE (ProControl series).
| Manufacturing company : | GCE, s.r.o. |
|---|---|
| Address : | Žižkova 381, 583 01 Chotěboř, Czech Republic |
| E-mail : | sales@gcegroup.com |