Compressed air hose, Page 15
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
Hose clamp SW1 - 16mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 8 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
Hose made of PU Elastollan C-98 black, dimension 8/5,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature...
Hose clamp designed for hose diameters 60-145 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Clear hose with dimensions 12/110 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...
LPH press ring with a diameter of 38 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
High-quality blue 6/4 mm spiral hose with extreme spiral return capability of 2 m and long service life, including end quick couplings. Made of branded granular elastollan 1190....
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...
Hose clamp designed for hose diameters 60-170 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Plastic roll 25 m - PA12 for compressed air piping. Pipe size 18 / 15 mm with a recommended operating pressure of 12 bar. Classic blue colour as marking for air ducts. Easy...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm and straight ends.
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses in the range of 25-40 mm. Manufactured according to DIN 3016. With house and...
LPH press ring with diameter 14,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
LPH press ring with diameter 12,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
LPH press ring with diameter 13,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
Blue pressure hose 11/6 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...
ES male male quick coupling DN7,2 with coupling nut and protective spring for 6,5 x 10 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling....
Plastic polyurethane hose 6/4 mm made of Elastollan 1198. Blue in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....
Hose made of PU Elastollan C-98 black, size 10/8 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...
Multi-purpose black hose with blue stripe, diameter 28/19 mm. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...
FoxiPro PUR XL suction hose with a diameter of 51 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...
LPH press ring with a diameter of 18 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 60 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
The blue plastic spiral hose 12/8 mm made of polyurethane in a length of 7.5 m, including fitted hose ends, is characterised by high resistance to breakage, abrasion and...
The 14/12 mm Teflon TFE Milk Tubing are tubing with excellent resistance to chemicals and high temperature. Ideal dielectric properties, resistance to the effects of oxygen,...
LPH press ring with a diameter of 16 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm and straight ends.
Plastic polyurethane hose 10/6,5 mm made of Elastollan 1198. Blue in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....
Clear tubing with 8/4 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...