Compressed air hose, Page 16
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
FBW deformation clamp with a range of 11.3mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...
Black SBR barrel, black SBR sleeve 23/16 mm diameter with longitudinal positive grooving, textile pressure braid. Hose designed for the transport of water and glycol-based...
Multi-purpose black hose with blue stripe, diameter 28/19 mm. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...
Female quick coupling DN7,2 with mandrel, swivel nut and spring for 10/8 mm hose. Design in pure brass MS 58 equipped with shut-off valve. New mandrel contour for better seating...
Blue plastic hose with 8/6 mm diameter and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high flexibility...
PLE water and compressed air hose with a diameter of 26/16 mm. Black tube and casing - oil and abrasion resistant with 1 textile braid.
SW4 100mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 19mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Hose clamp PW1 63 mm with tightening screw on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick...
The blue plastic spiral hose 8/5 mm made of polyurethane in 10 m length, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The...
FBW deformation clamp with a range of 21.2mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...
PMW 20mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 70-90 mm. Manufactured according to...
FBW deformation clamp with a range of 7.6 mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.
Blue pressure hose 18,5/13 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...
Hose clamp PW1 139 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Hose clamp PW1 148 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Hose clamp PW1 161 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and tightening...
Hose clamp PW1 59 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Suction hose PUR1 with a diameter of 254 mm made of abrasion-resistant polyurethane foil with steel wire spiral. Designed for suction and ventilation of air, non-aggressive...
Low-cost plastic spiral hose 10/6.5 mm polyurethane, 7.5 m long, including quick couplers in blue. The small diameter of the spiral saves space. Polyurethane flexible hose for...
The blue plastic spiral hose 8/5 mm made of polyurethane in a length of 7.5 m is characterised by high resistance to breakage, abrasion and pressure. The small diameter of the...
FoxiPro PUR L suction hose with a diameter of 60 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...
PW4 35mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Fixed fitting with G1/4" female pipe thread for 5 x 8 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.
Clear tubing with 14/10 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...
The blue plastic spiral hose 6/4 mm polyurethane, 15 m long, is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...
FoxiPro PUR L suction hose with a diameter of 70 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
The blue plastic spiral hose 6/4 mm polyurethane, 10 m long, is characterised by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...