Compressed air hose, Page 19
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
_(1).jpg)
.png)
Product sorting
List of products
Serrated V-belt with a calculated length of 1 010 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
SW4 260mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Black plastic spiral hose 12/9 mm in length 6 m without end caps for explosion hazardous areas according to directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm,...
Fecal hose with an inner diameter of 20 mm and an operating temperature of -20/+60°C, well flexible even at low temperatures. Made of softened PVC in blue, reinforced with a...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 70-90 mm. Manufactured according to DIN 3016. With house and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 1500 mm and straight ends.
FoxiPro PUR L suction hose with a diameter of 120 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...
SW4 140mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 31mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Fixed fitting with R1/2" male tapered thread for 11 x 16 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
Serrated V-belt with a calculated length of 900 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 12.5 m and long service life. Made of branded granulate elastollan 1190 without end quick...
The inner length is 920 mm and the calculated length is 950 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 180 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Serrated V-belt with a calculated length of 825 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm green. Special pressure hoses for easy assembly without the need for hose...
FoxiMulti Neoprene Suction Hose 203 mm diameter made of polyester fibre coated neoprene with a spiral of hot-dip galvanized steel strip. Resistance to oils, UV radiation, ozone...
FoxiPro PUR L suction hose with a diameter of 38 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...
Quick coupling nipple swivel with protective spring for hose 8 x 12 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is...
For hose type PU 6.5 × 10 with a length of 6 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length adjustment....
For hose type PU 8 × 11 with a length of 5 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length adjustment. Total...
Suction hose PUR1 with a diameter of 80 mm made of abrasion-resistant polyurethane foil with a steel wire spiral. Designed for suction and ventilation of air, non-aggressive...
SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Hose clamp PW1 174 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...
PW4 39mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Swivel fitting with male tapered thread R1/4" for hose size 6.5 x 10 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure...
Quick coupling swivel with protective spring for hose 9 x 13 mm in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Hose clamp designed for hose diameters 60-145 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
PW4 22mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Designed for TPU 8 × 12 hose type with a length of 12 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...
Swivel fitting with male tapered thread R1/4" for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
CBW4 hose clamp with lock in the range of 15.5-17 mm and a strap width of 8 mm. Installation for easy visual inspection, no subsequent maintenance required. The rounded outer...
Designed for rubber hose type 10 × 17 with a length of 15 m. Designed for polyurethane or rubber hose. Automatic hose retraction with length adjustment. Total drum weight 18 kg.
Designed for rubber hose type 13 × 20 with a length of 10 m. Designed for polyurethane or rubber hose. Automatic hose retraction with length adjustment. Total drum weight 18 kg.
For hose type PU 10 × 14 with a length of 20 m. Designed for polyurethane or rubber hose. Automatic hose retraction with length adjustment. Total drum weight 18 kg.
Designed for hose type PU 10 × 14 with a length of 25 m. Designed for polyurethane or rubber hose. Automatic hose retraction with length adjustment. Total drum weight 18 kg.
The inner length is 940 mm and the calculated length is 970 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...
The inner length is 1 320 mm and the calculated length is 1 350 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm grey. Special pressure hoses for easy assembly without the need for hose...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm blue. Special pressure hoses for easy assembly without the need for hose...