Hose Fuel Profi PVC - 17/12 mm
Code: FUPC-12Related products
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 12-20 mm. Manufactured according to DIN 3016. With house and tightening...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 12-20 mm. Manufactured according to...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 12-20 mm. Manufactured according to DIN 3016. With house and tightening...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening screw and...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses with a range of 16-27 mm. Manufactured according to...
Worm hose clamps with a band width of 12 mm and a range of 15 -24 mm in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce...
DW1 hose clamps with perforated tape in material finish W1 with a tape width of 8.5 mm and a range of 12-20 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of...
DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 12-20 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...
Hose clamps with perforated band in material finish W4 with a band width of 8 mm in the range of 12-20 mm. According to SAE standard with house and tightening screw and hexagon...
Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 16-27 mm. According to SAE standard with house and tightening screw and...
PMW 18mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.
Hose clamp PW1 19 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...
Deformation hose coupling EWD1 with a range of 15 to 18 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....
Deformation hose clamp EWS4 range 15,3 to 17,5 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...
CBW4 hose clamp with lock in the range of 16.5-18 mm and a strap width of 8 mm. Installation for easy visual inspection, no subsequent maintenance required. The rounded outer...
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Product detailed description
Fuel Profi PVC fuel hose - FUPC-12
- single-layer hose made of soft PVC in transparent green, resistant to petrol and oil
- operating temperature -10/+60 °C, non-pressure design
- hose conforms to EN 12115 and EN 1761, electrically conductive R < 106 Ohm
- hoses for non-pressure transport of gasoline, oils, cooling emulsions, water and air
Additional parameters
| Category: | Fuel Profi PVC fuel hose |
|---|---|
| Pressure: | 0 bar |
| Barva: | Green |
| Material: | Softened PVC |
| Medium: | Air, Water, Oils, Cooling water, Abrasive, Petrol, Biofuels |
| Temperature: | -10/+60 °C |
| Outer diameter: | 17 mm |
| Inner diameter: | 12 mm |
Be the first who will post an article to this item!
Be the first who will post an article to this item!
![]() |
![]() |
Multinational company with offices in the Czech Republic
The company Gates Hydraulics sro, which belongs to the multinational giant Gates Corporation, has been based in the Nové Pole industrial zone in Karviná since 2005. The conglomerate was founded in 1911 and is still headquartered in Denver, USA. It currently has offices in North and South America, Europe, Asia and Australia. The Czech facility specializes mainly in the production of hoses and metal hose ends. We offer high-pressure, premium hoses for the transport of fuels and mineral oils and low-pressure hoses suitable for the transport of cooling emulsions, water or air.
![]() |
Vision and missionThe entire giant company is united by a single vision: to be number 1 in its field. Gates Hydraulics sro therefore meets the evaluation parameters of the world standard and constantly strives to improve its technical solutions in the field of hydraulic hoses and their components. The company's mission is to create an organization and culture that is capable of continuously delivering superior products, services and experiences that exceed customer expectations, ensuring steady growth in market share, profit and return on invested capital, which the company is already achieving on a global scale. |


