Plastic air treatment unit WE14P up to 13 bar - G 1/4" G 1/4" · up to 13 bar · 20 µm filtration · 260 l/min · 156 × 80 mm
Code: WE14P
Related products
Product detailed description
Complete air treatment with a G 1/4" thread: a pressure regulator with a 20 µm filter and a lubricator joined into one 156 × 80 mm assembly. It cleans the air, reduces the pressure from as high as 13 bar to 0 to 8 bar and adds oil. Flow 260 l/min.
Specifications
| WE14P — specifications | |
|---|---|
| Type | Two-piece unit: filter regulator and lubricator |
| Connection | G 1/4" female thread |
| Inlet pressure | up to 13 bar |
| Pressure setting range | 0 to 8 bar |
| Setting lock | knob lock |
| Flow | 260 l/min |
| Height × width | 156 × 80 mm |
| Filter rating | 20 µm |
| Spare filter element | 20 µm VFP20, finer 5 µm VFP5 |
| Bowl volume | filter 16 cm³, lubricator 27 cm³ |
| Condensate drain | semi-automatic, push button also under pressure |
| Pressure gauge | not included, G 1/8" port |
| Body material | plastic, transparent bowl |
| Working temperature | −10 to +50 °C |
| Medium | compressed air |
What it is for
It suits a single tool or actuator that needs clean, lubricated air at a constant pressure, and it is connected as one piece. The G 1/4" thread is suitable for a workstation with pneumatic tools or for a small compressor.
Without a lubricator, FDM14P is enough. The spare filter element is VFP20, the filter bowl NFP, the lubricator bowl NOP and the pressure gauge MZ01-14.
Ventilek’s tip
Leave space under the bowls. When mounting, allow room for draining the condensate and topping up the oil.
Additional parameters
| Category: | Compact plastic compressed air treatment units I3 up to 13 bar |
|---|---|
| Version: | Complete unit |
| Pressure: | 13 bar |
| Dimensions: | 156 × 80 mm |
| Filtering ability: | 20 µm |
| Filter insert: | Replacement insert 20 µm (VFP20) |
| Medium: | Compressed air |
| Vessel volume: | 16 - filter, 27 - oil cc |
| Condensate discharge: | Semi-automatic |
| Working temperature: | -10 / 50 °C |
| Flow: | 260 l/min |
| Regulatory range: | 0 - 8 bar |
| Thread: | G 1/4" |
| Thread for manometer: | 1/8" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company employs more than 700 peopleThe company Metal Work has been engaged in the production of devices for treating compressed air and fittings since 1967, when it first started its operations. Since then, the Italian manufacturer has evolved over several decades to finally become one of the leading tyre manufacturers. Today, it employs over 350 people at its plant, with another 4 hundred working in its Italian and foreign offices. Expert and competent advice and availability of services is ensured by our extensive network of 46 branches in Italy and abroad, with which we cooperate. Currently, you can find the brand Metal Work on the following products: actuators, valves, adjustment units, fittings and accessories and pneumatic actuator KIT. |
 |
 |
The certificate guarantees quality assurance
Over the years, the entire production process has increased in quality to such an extent that the brand has become synonymous with certainty and quality in its field. In advance, the development department ensures that the most advanced technologies that the market will require in the future are always taken care of with confidence. The quality of the products themselves was certified by the German DEKRA (TGA) when their products were awarded ISO 9001 certification in 1992. Another certificate, this time in the environmental field, was obtained by the company in accordance with ISO 14001 in 2001.