Pneu and Aku tools with gun technology, Page 2

Set of blow gun with 100 mm nozzle and 5 m spiral hose with 8/5 mm diameter.

Extended and curved GN-L nozzle for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm.

Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.

Practical five-piece set of basic guns with accessories for DIY, craft and general maintenance work. Set includes: 1 pc spray gun with top container, 1 pc air blower, 1 pc blow...

Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.

Professional spray gun with 1.7 mm nozzle in top-canister version, regulation of air supply, beam shape and paint quantity. Low-pressure HVLP technology to save paint. High...

Set of blow gun with 30 mm nozzle and 5 m spiral hose with 8/5 mm diameter.

Set of 3 TG tyre inflator valves : vbicycle valve, needle valve for filling balls, valve for inflating mattresses.

Spray gun with upper container and 1.5 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...

ABG03-IL1 blow-off gun with injector nozzle (100 mm) based on the Venturi principle. Amplifies the air flow without increasing consumption – ideal for powerful and economical...

Replacement upper container 600 ml (SGH2007R-N) for SGH2007R gun. Lightweight, durable and easy-to-clean container for paints and varnishes. Suitable as a replacement for a worn...

Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.

Spray gun with upper container and 1.8 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...

Accessories for SG990-T18 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.8 mm nozzle version.

Professional blasting gun SX-4101 designed for gentle surface cleaning using baking soda. Ideal for removing rust, paint, grease, or limescale without damaging the substrate....

The inexpensive blast gun is used to remove rust from metal surfaces by blasting with special sand with grains up to 0.8 mm, designed for blasting smaller areas. Design with...

Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 4 kg. Aluminium body with 2000 mm long lower cable outlet and...

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 8 mm screws.

Extended curved nozzle GN-LSF for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Combination of safety nozzle...

The ABG03-L5 blow-off gun with extended nozzle (500 mm) is designed for safe and effective compressed air cleaning, even in very deep or hard-to-reach areas.

Accessories for SG990 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.2 mm nozzle version.

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 19 mm screws.

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.

GN-IA aluminium injector nozzle with extreme performance by drawing and drawing air from the ambient atmosphere into the air stream of the gun. Aluminium design for higher...

The professional tyre inflator with Ø80 mm pressure gauge offers a convenient pressure reading thanks to the clear double bar/psi scale. It is equipped with a rear connection,...

Accessories for SG990 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.5 mm nozzle version.

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.

Set of basic pneumatic inflator with auto valve and 5 m spiral hose with diameter 8/5 mm.

The M7 DB-1825 with 5.0 Ah capacity is a reliable and powerful 18V Li-ion battery that provides long life and consistent performance for all M7 platform tools. Thanks to modern...

Airbrush in practical set with vinyl hose, containers, tightening wrench, dropper and feeding adapter. Adjustable coating width from 6 to 40 mm. Air inlet 1/4" with special...

Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.

Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.

Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 18 mm screws.

Basic tyre inflator TG01 for easy filling of compressed air into tyres of cars, motorcycles, bicycles etc. Spare parts and accessories for tyre inflators, valves, needle valves,...

Balancer type 9320 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2,5 kg. Aluminium body with 2,000 mm lower cable outlet and...

Professional spray gun with 1.4 mm nozzle in top-canister version, regulation of air supply, beam shape and paint quantity. Low-pressure HVLP technology to save paint. High...

Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 18 mm screws.

Small spray gun with 0.8 mm nozzle, 100 ml upper container, HVLP technology with a working pressure of 2 to 3.5 bar and a consumption of 227 l/min. Suitable for smaller areas...