Pneu and Aku tools with gun technology, Page 21
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Pneumatic washing, spraying and sandblasting guns M7
-
Washing gun; pressure washing with water
Product sorting
List of products
Straight grinder with stop clamp for grinding smaller parts; extended version for grinding in deep internal areas. Universal clamping shank with the option of using 3 or 6 mm...
Miniature pressure regulator for direct mounting on the spray gun inlet. Allows precise adjustment of the pressure entering the gun. Equipped with pressure gauge and manual...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
500 mm long hose with double-sided valve as accessory for the TG-09 wheel inflator. Connection of the hose with G1/4" thread.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
A series of professional drills for general drilling work, especially in the craft and maintenance sector. Double planetary gearbox with three toothed wheels, one-hand direction...
Replacement head for QG-103 sheet metal cutter. Designed for sheet metal separation with perfect handling and cutting in all directions. Sheet metal cutter designed for...
Pressure vessel system consisting of a 680 ml upper vessel equipped with compressed air connection, pressure regulator and throttle valve. Designed for spraying structural...
Sandpaper M7 QB-9916S-08K5 — diameter 150 mm, grit P80, self-adhesive, without holes, pack of 5 pcs. For orbital sanders.
Universal hand spray gun with excellent spray quality for the most demanding applications. Areas of application: car paint shops, industrial painting, e.g. furniture production....
Pneumatic impact wrench M7 NC-4255QK 1/2" in quiet execution. Set with case. Max. torque 1,627 Nm, noise level below 85 dB. For indoor tire services.
Miniature rubber tap with 2 mm nozzle. Ideal for blowing sensitive surfaces that must not be damaged by touch. The airflow is triggered by pressing the rubber part. Operating...
Pneumatic belt sander M7 QB-322C with a 20×520 mm belt. Larger format for industrial grinding of welds and larger surfaces. Speed regulator, ergonomic handle.
M7 DRH-101 18 V cordless hammer drill with SDS+ chuck. 3 modes (drilling / hammer drill / chisel), capacity 30 mm in concrete, 13 mm in metal, 26 mm in wood. LED lighting,...
Cordless hedge trimmer M7 DHT-101 18 V — for trimming hedges and ornamental shrubs. Brushless motor, double-sided blade, compatible with the M7 18 V platform.
Professional cordless LED work light M7 DWL-102 18 V — higher power, large lighting range. For construction and outdoor work.
Cordless grease gun M7 DGG-102 18 V for standard 400g cartridges DIN 1284 and Lube Shuttle. Built-in pressure relief valve, automatic protection. For mobile service without a...
Cordless pressure washer M7 DPW-101 18 V with a pressure of 25 bar (360 PSI), flow rate of 2.8 l/min, and a 4-in-1 nozzle. Weight only 1.72 kg, hose 4 m. For washing cars in the...
For manual tightening of screws and nuts with a torque of 20 to 200 Nm.
For manual tightening of screws and nuts with a torque of 100 to 600 Nm.
Sheet metal shears in pistol design QG-202. Designed for cutting sheet metal with straight cut, aluminium sheet up to 1.6 mm thick, steel sheet up to 1.2 mm thick and stainless...
Industrial quality body saw for heavy duty cutting of sheet metal, plastics and wood. Improved handle ergonomics and specially designed cylinder for lower vibration. Trigger...
Angle grinder for grinding and separating metal parts with a disc diameter of 178 mm. Very low noise level only 77 dB, working pressure 6.3 bar. Designed for normal professional...
Ergonomic knee pad M7 for floor work — car repair shops, body shops, plumbers. Cushioning foam, washable surface.
Nails M7 FN34H-2-8-63 — diameter 2.8 mm, length 63 mm. For pneumatic nailers M7.
Staples M7 ST90-25 90° — length 25 mm. For pneumatic staplers M7.
Belt sander for grinding small surfaces, easy access to narrow spaces; working pressure 6.3 bar. Designed for normal professional use; areas of application: woodworking,...
M7 NC-8266S pneumatic impact wrench with 1" square drive, standard handle (straight axis) and a torque of 3,118 Nm. Twin hammer mechanism, composite body. For tire service and...
Pneumatic impact wrench M7 NC-8266S-6 with 1" square drive and extended 6" shaft. Standard (S) handle, max. torque 3,118 Nm, twin hammer. For trucks with dual wheels.
Pneumatic mini angle grinder M7 QB-623 with a 50 mm disc and a high speed of 19,000 rpm. For fine work in tight spaces — body details, workshops, restoration. 1/4" UNC thread.
Professional 1/2" pneumatic ratchet wrench with a torque of 122 Nm and quiet operation. Compact aluminum body, non-slip rubber grip — ideal for working in engine compartments...
Attachment for blind rivets with size M6-M8-M10.
Professional pneumatic-hydraulic riveter M7 PA-211TS for riveting brake calipers of trucks. Towing force 1,700 kg-f, rivet capacity 2.4–6.4 mm, stroke 18 mm. For truck service...
Basic accessories for the Profipaint HVLP spray gun. Jet set 1.7 mm.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 24 mm screws.
Composite impact wrench with 1/2" clamping square for tightening and loosening smaller screws up to M16. The mini version with a length of only 120 mm and a low weight of 1.38...