Bases and casters
In the "Bases and Casters BH" category, you will find the complete range of support and rolling elements of the ALUSIC brand intended for constructions with BH series aluminum profiles. The range includes adjustable bases with threads (e.g. M6-M20), casters with flanges for these profiles, flanges for mounting casters, and floor brackets. The products are designed to enable stable anchoring and mobility of frame structures in production and assembly areas.
Product sorting
List of products
Rubber base pad insert with a diameter of 50 mm.
Rubber base pad insert with a diameter of 80 mm.
Rubber base pad insert with a diameter of 40 mm.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Flange for attaching bases and castors to 45x90 profiles with M20 thread.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.
Flange for attaching bases and castors to 50x50 profiles with M10 thread.
Flange for attaching bases and castors to 50x50 profiles with M16 thread.
Flange for attaching bases and castors to 50x50 profiles with M12 thread.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Square base for mounting on profiles with a 40x40 section.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Flange for attaching bases and castors to 45x90 profiles with M10 thread.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Square base for mounting on profiles with a 50x50 section.
Square base for mounting on profiles with a 45x45 section.
Flange for attaching bases and castors to 45x90 profiles with M12 thread.
Square base for mounting on profiles with a 50x50 section. Attachment to the profile from three sides.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Floor bracket for mounting on profiles with a width of 30 mm.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M16 thread.
Flange for attaching bases and castors to BH 30-8 series profiles with a 30x60 section, equipped with an M12 thread.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Square base for mounting on profiles with a 90x90 section.
Square base for mounting on 80x80 section profiles.
Two-part base for mounting on profiles with sections 90x90 and 90x180.