Bases and casters, Page 2
Product sorting
List of products
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Two-part base for mounting on profiles with a section of 50x100.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Two-part base for mounting on profiles with 45x90, 45x135 and 45x180 sections.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Two-part base for mounting on profiles with sections 90x90 and 90x180.
Square base for mounting on profiles with a 90x90 section.
Flange for attaching bases and castors to BH 50-10 series profiles with a 100x100 section and M16 thread.
Tripod for profiles with a 45x45 section and with the possibility of attaching 3 bases with M16 thread.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Floor angle bracket for mounting on profiles with a width of 45 mm.
Square base for mounting on 80x80 section profiles.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
Adjustable foot 40x100 mm with M8 thread
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M20 thread.
Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M16 thread.
Two-part base for mounting on profiles with a section of 100x100.
Base with a diameter of 100 mm and an M20 connection thread. Base load capacity 2200 kg.
Flange for attaching bases and castors to BH 50-10 series profiles with a 100x100 section and M20 thread.
Flange for attaching bases and castors to 50x50 profiles with M20 thread.
Tripod for profiles with a 40x40 section and the possibility of attaching 3 bases with M16 threads.