Separate drives for automation
If you're looking to automate your operation, you're right in this category, focusing on the different types of pneumatic and electric actuators. Pneumatic actuators are available from OMAL in single-acting and double-acting versions. Electric drives are also available with the option of a backup power supply.
-
Double-acting actuators; DA double-acting version
-
Single-acting actuators; SR single-acting version
-
Electrical sensors; positioners
-
VCQ electric drives; electrical design
Bestsellers
List of products
The VT1000ER positioner is used for positioning pneumatic actuators using a 0-90° transducer. Designed for positioning single and double acting pneumatic actuators
double-acting DAN pneumatic actuator connection using ISO 5211 flanges for F03 flange with 11 mm square and 15 Nm torque. Material : anodized aluminium, NBR gasket. Designed to...
double-acting DAN pneumatic actuator connection using ISO 5211 flanges for F03 flange with 9 mm square and 8 Nm torque. Material : anodized aluminium, NBR gasket. Designed to...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F05/07 flange with 17 mm square and 106 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F05/07 flange with 17 mm square and 120 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F07/10 flange with 22 mm square and 180 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for 46 mm square flange F14 with 1,920 Nm torque. Material : anodized aluminium, NBR gasket....
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F07/10 flange with 22 mm square and 240 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F03/05 flange with 11 mm square and 30 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F07/10 flange with 22 mm square and 360 Nm torque. Material : anodized aluminium, NBR...
double-acting DAN pneumatic actuator connection using ISO 5211 flanges for F03/05 flange with 11 mm square and 45 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F10/12 flange with 27 mm square and 480 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F05/07 flange with 14 mm square and 60 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F10/12 flange with 27 mm square and 720 Nm torque. Material : anodized aluminium, NBR...
double-acting pneumatic actuator DAN drive connection using ISO 5211 flanges for F10/12 flange with 36 mm square and 960 Nm torque. Material : anodized aluminium, NBR gasket....
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F14 flange with square flange , 36 mm with torque of 1440 Nm. Material : anodized...
Electric actuator VCQ002-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Connection to fittings using ISO...
The VCQ002-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Connection to fittings using ISO 5211...
Electric actuator VCQ004-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 40 Nm with connection. to...
Electric actuator VCQ004-24D is used for closing industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 40 Nm with connection. to...
Electric actuator VCQ008-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 80 Nm with connection. to...
The VCQ008-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 80 Nm with connection. to...
Electric actuator VCQ008-230 is used for closing industrial valves, especially ball valves and butterfly valves. Eletric version 400 VAC 3f. Torque 80 Nm with connection. to...
The VCQ010-230 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 100 Nm with connection. to...
The VCQ010-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 100 Nm with connection. to...
The VCQ010-400 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Eletric version 400 VAC 3f. Torque 100 Nm with connection. to...
The VCQ016-230 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 160 Nm with connection. to...
The VCQ016-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 160 Nm with connection. to...
The VCQ016-400 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Eletric version 400 VAC 3f. Torque 160 Nm with connection. to...
Electric actuator VCQ024-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 240 Nm with connection. to...
Electric actuator VCQ024-24D is used for closing industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 240 Nm with connection. to...
Electric actuator VCQ024-400 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 400 VAC. Torque 240 Nm with connection. to...
Electric actuator VCQ035-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 350 Nm with connection. to...
Electric actuator VCQ035-24D is used for closing industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 350 Nm with connection. to...
The VCQ035-400 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Eletric version 400 VAC 3f. Torque 350 Nm with connection. to...
Electric actuator VCQ050-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 500 Nm with connection. to...
The VCQ050-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 500 Nm with connection. to...
The VCQ050-400 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical version 400 VAC. Torque 500 Nm with connection. to...
Electric actuator VCQ080-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 800 Nm with connection. to...
The VCQ080-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 800 Nm with connection. to...