BH profiles and accessories, Page 2

Plastic cap for 25x40 angle bracket in black.

Plastic end cap for 25x40 angle bracket in grey.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Rubber insert for stop pin 084.523.003.

Universal angle bracket with a 90° angle and dimensions of 28x27 for connecting profiles from the outside using M6x12 screws.

Clip for securing cables to aluminium profiles.

Plastic handle cover 084.505.001, orange colour.

Shimming base for block 084.510.001 with a height of 3 mm.

Spacing base for block 084.510.001 with a height of 2 mm.

Spacing base for block 084.510.001 with a height of 5 mm.

Polyamide handle with dimensions 113x35 mm, blue colour.

Universal angle bracket with a 90° angle and dimensions of 18x18 for joining profiles from the outside using M5x12 screws (AC 30-6 series) or M5x8 screws (BH 20-6 series)....

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Universal angle bracket with a 90° angle and dimensions of 18x40 for connecting profiles from the outside using M6 screws.

Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.

Polyamide handle with dimensions of 113x35 mm, black colour.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Angle bracket for joining profiles with a 30x30 section at a 45° angle.

Polyamide handle with dimensions 113x35 mm, orange colour.

Plastic end cap for 50x50 profile in black

Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.

Rubber base pad insert with a diameter of 40 mm.

Aluminium end cap for 60x60 channel profile.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Open polyamide handle with dimensions 130x48 mm, grey colour.

Square cap for corner joint 084.310.022 made of grey polyamide.

Floor bracket for mounting on profiles with a width of 30 mm.

Rubber base pad insert with a diameter of 50 mm.

Handle made of black polyamide, dimensions 108x38 mm.

Panel fixing block for thicknesses of 1 to 8 mm.

Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.

Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.

Aluminium drill bit with a diameter of D=7.5 mm.

Aluminium hinge with dimensions 55x42, for profile 30/panel.

Aluminium hinge with dimensions 65x42, profile profile 30/panel.

Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.

Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.

Universal angle bracket with a 90° angle and dimensions of 59x59 for connecting profiles from the outside using M6x16 screws.

Plastic cap for 18x18 angle bracket in grey.

Plastic cap for 27x27 angle bracket in black.