BH profiles and accessories, Page 2

Plastic end cap for 18x40 angle bracket in grey.

Blanking plug for 13 mm hole, made of grey polyamide.

Universal angle bracket with a 90° angle and dimensions of 25x40 for connecting profiles from the outside using M8x20 screws.

Universal angle bracket with a 90° angle and dimensions of 28x27 for connecting profiles from the outside using M6x16 screws. Design with guide tabs.

Rubber insert for stop pin 084.523.003.

Universal angle bracket with a 90° angle and dimensions of 18x40 for connecting profiles from the outside using M8x20 screws.

Clip for securing cables to aluminium profiles.

Plastic handle cover 084.505.001, orange colour.

Plastic cap for the base of a 45x45 profile.

Shimming base for block 084.510.001 with a height of 3 mm.

Spacing base for block 084.510.001 with a height of 2 mm.

Spacing base for block 084.510.001 with a height of 5 mm.

Polyamide handle with dimensions 113x35 mm, blue colour.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.

Polyamide handle with dimensions of 113x35 mm, black colour.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Polyamide handle with dimensions 113x35 mm, orange colour.

Plastic end cap for 50x50 profile in black

Rubber base pad insert with a diameter of 40 mm.

Aluminium end cap for 60x60 channel profile.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Open polyamide handle with dimensions 130x48 mm, grey colour.

Tripod for profiles with a 45x45 section and with the possibility of attaching 3 bases with M16 thread.

Connecting plate for creating a perpendicular joint between profiles with a 45x45 section.

Rubber base pad insert with a diameter of 50 mm.

Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8x20 screws.

Connecting plate for perpendicular connection of profiles with an edge width of 45 or 90 mm.

Aluminium hinge with dimensions 81x80, for 45/45 profiles.

Handle made of black polyamide, dimensions 108x38 mm.

Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.

Panel fixing block for thicknesses of 1 to 8 mm.

Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws.

Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.

Plastic cap for bases 084.409.004 and 084.409.002.

Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.

Square base for mounting on profiles with a 90x90 section.

Aluminium end cap for channel profile 45x45.

The 45x45 aluminium profile allows for the creation of channels with cables.

Flange for blanking off the end of a 45x90 profile connected to a compressed air source.