BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Square nut M6 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and spring.
Plastic end cap for 30x60 profiles in grey
Square cap for corner joint 084.310.022 made of grey polyamide.
Alignment base for fixing blocks with a height of 5 mm.
Plastic cap for 38x36 angle bracket in grey.
Plastic hinge made of polyamide with dimensions 50x50, for profiles 30/30.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Aluminium profile with a modular section size of 50x50 and 4 BH 50-10 shaped grooves.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Plastic end cap for 60x60 profiles in black
Plastic cap for angle bracket 27x27 in grey.
Plastic cover for angle bracket 86x86 in black.
Plastic hinge made of polyamide with dimensions 50x70, for 40/40 profiles.
Shimming base for block 084.510.001 with a height of 3 mm.
Square nut M10 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and perpendicularly positioned spring.
Corner bracket for slot for connecting BH 20-6 series profiles at a 90° angle.
Limit switch for detecting the position of hinged doors with 2 contacts (1xNC and 1xNO).
Pin with a diameter of D=8 mm for the mounting of gas spring 084.528.001.
Square nut M5 for BH 30-8 and IM 40-8 slots, equipped with guide and perpendicularly positioned spring.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Plastic end cap for 20x40 profiles in grey
Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.
Groove connector for direct connection of BH 20-6 series profiles.
Plastic cap for 42x41 angle bracket in grey.
Magnetic stop for detachable door installation.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.
Square nut M4 for BH 30-8 and IM 40-8 grooves, equipped with guide and perpendicularly positioned spring.
Plastic end cap for 20x20 profiles in black
Plastic end cap made of softened PVC for closing the groove of profiles series BH 40-10, 45-10 and 50-10 in grey.
Plastic cap for 43x43 angle bracket in grey.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.