BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
The 60x60 aluminium profile allows for the creation of channels with cables.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Magnetic stop for detachable door installation.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
M18x0.75 threaded magnet for removable door installation.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Gas spring with a stroke of 200 mm and a force of 350 N.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Flange for connecting a 45x90 profile to a compressed air source, with a 1/4" thread.
Flange for connecting a 45x90 profile to a compressed air source, with a 3/8" thread.
Door stop for removable door installation, made of brass.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Handle made of black polyamide with dimensions of 129x44 mm.
Floor angle bracket for mounting on profiles with a width of 45 mm.
Corner connector for connecting 3 profiles of the AC 45-8 or BH 45-10 series with a 45x45 cut at a 90° angle.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.
Handle made of black polyamide, dimensions 146x44 mm.
The 45x45 aluminium profile allows for the creation of channels with cables.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Plastic cover for angle bracket 86x86 in black.
Flange for connecting a 45x90 profile to a compressed air source, with a 1/2" thread.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Swivel castor with a diameter of 100 mm for mounting using a 60x60 flange, equipped with a brake.
Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.
Plastic cap for 43x86 angle bracket in black.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
Adjustable foot 40x100 mm with M8 thread
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Clip for securing cables to aluminium profiles.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
A sliding latch with a spring for closing doors, made of polyamide.