BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Flange for attaching bases and castors to 50x50 profiles with M10 thread.
Flange for attaching bases and castors to 50x50 profiles with M12 thread.
Flange for attaching bases and castors to 50x50 profiles with M16 thread.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Plastic end cap for 50x50 profiles in grey
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Handle made of black polyamide with dimensions of 129x44 mm.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
M8x40 zinc-plated steel cylindrical head screw
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Plastic end cap for 50x50 profiles in black
Square nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10, equipped with guide and perpendicularly positioned spring.
Gas spring with a stroke of 200 mm and a force of 250 N.
Gas spring with a stroke of 200 mm and a force of 350 N.
Shimming base for block 084.510.001 with a height of 3 mm.
Spacing base for block 084.510.001 with a height of 2 mm.
Spacing base for block 084.510.001 with a height of 5 mm.
Connection plate for creating a perpendicular joint between profiles with a 50x50 section.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.
Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 300 N force.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Connecting plate for creating a perpendicular joint between profiles with a 50x100 section.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.